Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 20, 2016 20:26:05 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 20, 2016 20:33:54 GMT
Original builds ............. On site fit it fuck off never to return .......... Not their problem r_YU1yvrdxzyzo1stXVb diy
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 20, 2016 20:36:33 GMT
This is an old cottage flats that was refurbed about 12 yrs ago, what I don't understand is they raised the tanks up and gained next to fuck all. smiley-sad056 nay
|
|
|
Post by tomplum on Sept 20, 2016 20:52:17 GMT
the other week i went to change an immersion heater, the twat who fitted the cylinder put the immersion heater at the back, it was a fortic, i had to drain down the cylinder, change the heater and adjust all the pipework so its the right way round, Who would do a thing like that??, they were teckintpiss good style, smiley-taunt005 show bum
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 20, 2016 20:59:25 GMT
the other week i went to change an immersion heater, the twat who fitted the cylinder put the immersion heater at the back, it was a fortic, i had to drain down the cylinder, change the heater and adjust all the pipework so its the right way round, Who would do a thing like that??, they were teckintpiss good style, smiley-taunt005 show bum Bloody nightmare Tom, some twats never think ahead but probably moan when they get to a job that's been installed by another twat. r_YU1yvrdxzyzo1stXVb diy
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 20, 2016 21:04:46 GMT
One house we had it was a new build many moons ago, the toss pot plumber who fitted the tank did not have a gasket for the immersion heater so the sick bastard used mastic .............. fortunately we never needed to change it
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 20, 2016 21:09:10 GMT
One house we had it was a new build many moons ago, the toss pot plumber who fitted the tank did not have a gasket for the immersion heater so the sick bastard used mastic .............. fortunately we never needed to change it Go easy on Tom he was having a bad day.
|
|
|
Post by tomplum on Sept 20, 2016 21:12:46 GMT
count yourself lucky i did't use pullers pearl of wisdom magic dust,,
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 20, 2016 21:13:33 GMT
count yourself lucky i did't use pullers pearl of wisdom magic dust,,
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 23, 2016 17:48:30 GMT
Another twat of a job, some knob has put the port valve just behind the cylinder smiley-sad056 nay how many times do we see this, no thought at all,twats. smiley-violent001 hammertime Attachment Deleted
|
|
|
Post by tomplum on Sept 23, 2016 18:14:20 GMT
on a Friday too, I had a struggle as well today, a betterbathroom toilet, they know how to give a boy a hard time, smiley-chores017 chop
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 23, 2016 18:19:47 GMT
on a Friday too, I had a struggle as well today, a betterbathroom toilet, they know how to give a boy a hard time, smiley-chores017 chop The best tool for them toilets Tom is a fucking sledge hammer.
|
|
|
Post by tomplum on Sept 23, 2016 18:26:33 GMT
I agree, i needed a fork lift truck to move this fucker today,, I wondered why the bloke who fitted did't use the fixing bracket, then i found out, its so heavy you'll never lift it over them, He'd just siliconed the covers over the holes,
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 23, 2016 18:30:12 GMT
I agree, i needed a fork lift truck to move this fucker today,, I wondered why the bloke who fitted did't use the fixing bracket, then i found out, its so heavy you'll never lift it over them, He'd just siliconed the covers over the holes, Did you price it Tom without seeing it
|
|
|
Post by tomplum on Sept 23, 2016 18:34:35 GMT
no way pedro, I slipped up earlier in the week cos i'm going a bit owltimerzs but I've had a sleep since, P8pACUU_eHpEO2kJIX4Cbedtime
|
|