Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 24, 2018 19:54:56 GMT
Nice one endfeed  you'll be a household name  |
|
|
|
Post by dickpuller on Mar 29, 2018 20:42:09 GMT
|
|
|
|
Post by tomplum on Mar 29, 2018 21:10:07 GMT
fuckin' hell dick they are cheap as chips, excellent find,,,  |
|
|
|
Post by boilerdoktor on May 3, 2018 19:38:23 GMT
|
|
|
|
Post by dickpuller on May 3, 2018 19:46:29 GMT
These would be good for the ‘hard of thinking’ fitting a new zone valve & not wanting to go into the spaghetti junction box BD. They could kill the power, snip the cable of the old ZV & connect the new one👍👍 |
|
|
|
Post by boilerdoktor on May 6, 2018 14:13:56 GMT
|
|
|
|
Post by tomplum on May 6, 2018 14:28:22 GMT
its a good thing to have Dr B but its a bit on the expensive side for a tight wad like me, I'd use my bolster for nothing,  |
|
|
|
Post by boilerdoktor on May 6, 2018 14:37:08 GMT
I use tiles and steel myself tom, trouble is I can’t always get it to stay in place.
|
|
|
|
Post by tomplum on May 6, 2018 15:05:20 GMT
thats a good point Dr B and it also keeps the heat on the back of the joint so it is a good tool to have, But I can get a lot of tins of Carling for £21, smiley-eatdrink009drinking |
|
|
|
Post by boilerdoktor on May 6, 2018 16:07:07 GMT
|
|
|
|
Post by rocketmanbkk on May 6, 2018 17:52:45 GMT
Yeah I’ve seen these but don’t know anyone who’s ever bought or used one |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 6, 2018 17:58:51 GMT
I'll look forward to your review doc when you've put it to the test. |
|
|
|
Post by battle1066 on May 6, 2018 19:55:16 GMT
When working on vehicle wiring harness - The gas soldering iron I use has this facility and it really works great on heat shrinking items compared to when not using it, so well worth a punt. |
|
|
|
Post by glowbug on May 18, 2018 13:00:22 GMT
Ive been away from plumbing a long time( just Been on gas only) however I’m now doing both, All the tips on here have been great by all 👍my tip I’ve just started doing ,is when refitting a close coupled cistern, a nice blob of grease on the metal/rubber washer , will hold it in place on the thread handsfree . and make it a lot easier to get wing nut on when in a tight spot, the beauty of this is , it will prevent rusting up aswell for when you swap the syphon again in couple of years, win win
|
|
|
|
Post by tomplum on May 18, 2018 13:18:12 GMT
yea good tip that glowbug, thanks,, |
|
you'll be a household name 
