|
|
Post by endfeed on Oct 28, 2016 21:31:39 GMT
Is there a certain height dergo valves have to termanate inside a room one bog two basins??
|
|
|
|
Post by tomplum on Oct 28, 2016 21:35:15 GMT
above the highest waste height, which will be the basin waste,
|
|
|
|
Post by endfeed on Oct 28, 2016 21:40:49 GMT
Cheers tom..will it be a big deal if its set lower??
|
|
|
|
Post by tomplum on Oct 28, 2016 21:52:03 GMT
no, its just that if the drain blocks it will overflow from the dergo, so if it never blocks, there's no problem,  |
|
|
|
Post by endfeed on Oct 28, 2016 22:04:50 GMT
Cheers tom😊
|
|
|
|
Post by rocketmanbkk on Oct 29, 2016 12:26:39 GMT
I see these under sinks. Now, they're never higher than the sink waste.
I take it Tom that when you say higher than the highest waste (basin), does that only apply if the waste is plumbed into the run with the durgo?
|
|
|
|
Post by tomplum on Oct 29, 2016 12:30:55 GMT
they have brought out some newer versions now that can be installed lower, So under the sink its probably one of the low type or bad plumbing,
|
|
|
|
Post by tomplum on Oct 29, 2016 13:18:08 GMT
I have't seen one under a sink and i can't image why anyone would put one there, are you sure its not just an anti vac trap rocket  |
|
|
|
Post by rocketmanbkk on Oct 30, 2016 9:32:51 GMT
I have't seen one under a sink and i can't image why anyone would put one there, are you sure its not just an anti vac trap rocket Mmmmmm... It could be. |
|
|
|
Post by rocketmanbkk on Oct 30, 2016 9:33:58 GMT
Nope had a look at a pic
Defo durgo
|
|
|
|
Post by rocketmanbkk on Oct 30, 2016 9:36:30 GMT
 Looks like this but the top is touching the worktop so it'll never pull off! |
|
|
|
Post by endfeed on Oct 30, 2016 10:40:04 GMT
Ive done this set up under my sink rocky,because the plumbing was bad when washing machine was on water was sucking out sink trap!! The kitchen stunk to high heaven!! Put a mcalpine a.a.v on, same as pic,and happy days😀 the dergo valve i asking tom about was the one for on a 110mm pipe,i just found out its the new type that can be at low level from flow plast..
|
|
|
|
Post by rocketmanbkk on Oct 30, 2016 12:03:01 GMT
I've seen them in bathrooms behind boxing
I fixed one once by taking the top off & putting it back on
£60 thx
|
|
