Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 2, 2017 22:26:37 GMT
Why no sealant on bath wastes? Just curious 'cos I do. Save It's not needed dc, but more than that I've now developed a real hatred of scraping the old mastic off these joints. For me, by not using it I'm making the next person to take the joint apart life's a little easier.  I agree Tappy on both counts there mate.  |
|
|
|
Post by wobblybob on Mar 2, 2017 22:27:59 GMT
Yes PB, I,m going to do one every month, describing what I,'ve been up to on the allotment the next one will be middle of this month mate.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 2, 2017 22:30:05 GMT
Yes PB, I,m going to do one every month, describing what I,'ve been up to on the allotment the next one will be middle of this month mate. Excellent wobbles, I'll look forward to it mate. |
|
|
|
Post by crowsfoot on Mar 3, 2017 21:17:17 GMT
they'll be ok in the garage for now, don't plant them out till after May and only then if its warm, Cucumber are very unstable, I grow at least 20 from seed knowing i'll only end up with about 4 or 6 by the time July is here, I don't know why they die, but they always do,  I'll not old out much faith then tom for my re-potted Q plants! I've got some timber and polythene ready so as soon as I'm up to it I'll have a go at building a little greenhouse for them. |
|
|
|
Post by rocketmanbkk on Mar 3, 2017 21:51:02 GMT
Just fitted one, the old one was cracked & literally fell apart as I touched it. I didn't use silicone, all nice & tight. No leaks. Fingers crossed. All good & lovely weather here, weeded my rear borders & swept Using silicon on these things just throws the washers out the sides when you tighten up,,,good move rocky mate. Cheers PB More plumb on Monday. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 3, 2017 22:03:11 GMT
Using silicon on these things just throws the washers out the sides when you tighten up,,,good move rocky mate. Cheers PB More plumb on Monday. Good man !! and I haven't forgotten about you helping me on an installation rocky. |
|
|
|
Post by rocketmanbkk on Mar 4, 2017 7:15:45 GMT
Cheers PB More plumb on Monday. Good man !! and I haven't forgotten about you helping me on an installation rocky. Neither have I PB My plan for this year is now to start my outdoor work in a week or 2 and I'll then be busy busy. In Sept I'm starting evening L3 core gas at Langley college 2 nights a week. Then straight after I'll do the ACS part (so it's still fresh in. Y head). I might try to cut the outside wide to 3/4 days a week to still do some plumb, I just have to see what I get in. I'm going to try to coin as much as I can outside before the burn out sets in! I also want a bigger van next year with 3 seats so I can get rid of my car. I've got a plan & hopefully it'll work out Cheers PB. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 4, 2017 9:47:36 GMT
Go for it rocky and you'll make it work for sure. smiley-chores017 chop .you've got the drive to achieve your own goals mate. |
|
|
|
Post by rocketmanbkk on Mar 4, 2017 9:54:01 GMT
Cheers PB
If I don't do it now I'll never do it.
|
|
|
|
Post by tomplum on Mar 4, 2017 11:29:38 GMT
good man rocky, go for it mate,,we'll help all the way,, |
|
|
|
Post by rocketmanbkk on Mar 4, 2017 11:43:02 GMT
Cheers Tom
It's all in my plan. Once I get the course finished & ACS i think I want to go in these manufacturers fault finding courses so I have an idea of what problems & possible fixes. I've also thought about trying to go employed for 6-12 months with a busy engineer or company to use their talent & soak up as much as I can. All just ideas but it's a start. Once I'm doing it like plumb it falls into place & the confusion & rocket science subside into what are simple tasks & fixes.
|
|
|
|
Post by tomplum on Mar 4, 2017 11:52:46 GMT
Its a long road with no finish line rocky, We are still learning stuff everyday, that's what make plumbing so interesting, No one knows it all, qwerty
|
|
|
|
Post by endfeed on Mar 6, 2017 22:07:40 GMT
Its a long road with no finish line rocky, We are still learning stuff everyday, that's what make plumbing so interesting, No one knows it all, qwerty erm,correction tom,stevo pro knows it all 😂 |
|
|
|
Post by tomplum on Mar 6, 2017 22:12:22 GMT
correction is aknowledged endfeed and I adjust that statement,, no one knows it all except wizo stevo the cleverest basterd under the sun, we're just waiting for the twat to show us something new, Attachment Deleted |
|
|
|
Post by endfeed on Mar 6, 2017 23:07:14 GMT
Dont hold your breath tom😷
|
|
