|
Post by endfeed on Nov 28, 2017 19:00:49 GMT
Any recommendations to a good drain down hose?I've always had cheap o one,it's become a pain untangling it and kinks in itπ proper spat my dummy out with it,funny looking backπ
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 28, 2017 19:03:39 GMT
Any recommendations to a good drain down hose?I've always had cheap o one,it's become a pain untangling it and kinks in itπ proper spat my dummy out with it,funny looking backπ I've got a hoselock one which seems ok , I know the real cheap ones are shite mate.
|
|
|
Post by tomplum on Nov 28, 2017 19:06:44 GMT
I just keep a short lenght of good hose and connect it to lenghts of speetfit to get out of the house,
i'll do a vid on that tomorrow endfeed good thinking,, foto
|
|
|
Post by battle1066 on Nov 28, 2017 19:31:45 GMT
Any recommendations to a good drain down hose?I've always had cheap o one,it's become a pain untangling it and kinks in itπ proper spat my dummy out with it,funny looking backπ I've got a hoselock one which seems ok , I know the real cheap ones are shite mate. Same as PB for me just a standard Hoselock but I've seen a couple of beauties but the price is enough to give you nightmares.
|
|
|
Post by endfeed on Nov 28, 2017 19:32:41 GMT
Yer great tom,look forward to it. Looking on the net at a orange non kink one Β£50 shocking quidπ€
|
|
|
Post by rocketmanbkk on Nov 28, 2017 19:38:00 GMT
Iβve got a non kink one
15m from eBay
Think it was Β£30
|
|
|
Post by endfeed on Nov 28, 2017 19:44:36 GMT
Β£30 not bad considering how much hose pipes are...everything expensive these days.might try and sneak it in on a job let work payπ
|
|
|
Post by endfeed on Nov 28, 2017 20:04:11 GMT
Just seen a silver line hose Β£12.50ππππππππ
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 28, 2017 20:21:41 GMT
Just seen a silver line hose Β£12.50ππππππππ Quality !!!
|
|
|
Post by crowsfoot on Nov 28, 2017 20:43:47 GMT
|
|
|
Post by endfeed on Nov 28, 2017 20:52:37 GMT
Niceone c/f,just been looking at similar I think I'm Gona get that one Β£8 can't go wrong.coolπ
|
|
Astra
Full Member
Posts: 219
|
Post by Astra on Nov 29, 2017 20:58:43 GMT
Hi I use a reinforced type as used for air pipe in engineering industry never kinks just roll up
Another Idea i use and have made up to special pipes about 18" long they consist of an old radiator tail say 3/4
connect this to a clear section of plastic tube connect the other end to a short length of 15mm copper tube then
connect this to another short piece of hose then connect to a garden compression joiner and then you have it
then when there is no drain valve or you do not want to use or disturb the one that is there just turn off both
valves drain the one radiator then remove it completely then just screw this special pipe onto the end of the
closed off rad valve then connect your hose to the end of the garden compression joint then run your pipe
out to the drain then just open the rad valve and drain your system and the way you go !!!!!
I have also made up a special hose to fit the other type of radiator valve using a 15mm Tail hope this helps may be Tom might do a VID for everyone
What do you say Tom !!!
|
|
|
Post by tomplum on Nov 29, 2017 21:07:52 GMT
OK Astra, I'll do it,,
|
|
Astra
Full Member
Posts: 219
|
Post by Astra on Nov 29, 2017 21:16:32 GMT
Cheers Tom thanks for your input in advance !!!!
|
|
|
Post by dickpuller on Nov 29, 2017 21:38:25 GMT
|
|