|
|
Post by rocketmanbkk on Feb 4, 2018 18:15:56 GMT
Well, for a change there’s good news & at gone 6 on a Sunday
Remember my monument torch broke, I emailed monument ages ago, no reply until Friday. The M.D. replied telling me to take it back to my seller & ask them to replace it.
Well, I wasn’t going running around so I told him, he just replied saying they’ll it for a new one. Great service.
I’ll report back when it arrives
|
|
|
|
Post by tomplum on Feb 6, 2018 13:05:04 GMT
thats top service rocky, how did it come to brake, I've never had one fail on me yet and i've had loads, the main fault I've had was the jet blocking after a while, then i've used bits of wire or pins etc and fucked it up proper, but never after only a few days,
|
|
|
|
Post by rocketmanbkk on Feb 6, 2018 13:18:39 GMT
The piece that goes into the gas bottle snapped off
I emailed monument & heard nothing
Then a surprise email
Good service
I’ll keep it as a spare
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 6, 2018 22:11:53 GMT
Monument are a good company and make some good quality tools.  |
|
|
|
Good news
Feb 6, 2018 23:01:19 GMT
via mobile
Post by endfeed on Feb 6, 2018 23:01:19 GMT
Where did you buy your olive splitter from p.b? Tight under a bath yesterday wishing I'd bought one👍
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 6, 2018 23:08:26 GMT
Where did you buy your olive splitter from p.b? Tight under a bath yesterday wishing I'd bought one👍 Cheapest places are Amazon or eBay mate, there are two companies that make them which are rothenberger or dickie dyer and both are as good as each other, mine is dickie dyer. |
|
|
|
Post by rocketmanbkk on Feb 7, 2018 7:58:28 GMT
Monument are a good company and make some good quality tools. Yes, agr ed there Pb The gas torch wasn’t fantastic but it’ll do as a spare |
|
|
|
Post by jamesy1893 on Feb 7, 2018 20:13:54 GMT
i kinda same as tom usually only the injecter blocks so i try me best to cover the tip after use but recently after years of fiddling for hours tryin allsorts to clean out injecter i done an old tom move with a cheap can of air compressd from poundland champered the straw to cover injecter a few blasts and bingo cleared working like new
|
|
|
|
Post by tomplum on Feb 7, 2018 21:09:37 GMT
good thinking that jamesy, I never thought of that, I'll do a video of that is a top idea, You'll get the credit of course,, |
|
|
|
Post by jamesy1893 on Feb 7, 2018 21:32:50 GMT
oh i like that tom wee mention in vid but yeah after years of trying tiny slithers of wire and tipping injecter in wd40 and trying to burn it with another torch haha it turns out compressed air from poundland worked i knew tom would be proud but more importantly my tight arse wallet too
|
|
|
|
Post by jcplumb on Feb 8, 2018 8:58:47 GMT
picture edited, thanks for bringing it to my attention, |
|
|
|
Post by rocketmanbkk on Feb 8, 2018 12:53:16 GMT
Next doors tree?
|
|
|
|
Post by arfur chrysaik on Feb 8, 2018 14:55:33 GMT
Your address on the box is there for all to see, best get Tom to cover it over or delete it. I did, thanks arfer, |
|
|
|
Post by rocketmanbkk on Feb 8, 2018 15:25:40 GMT
Can you delete it please Tom?
I tried but nothing happened
|
|
|
|
Post by rocketmanbkk on Feb 8, 2018 15:26:26 GMT
I think it’s gone
|
|
