|
|
Post by endfeed on Jun 6, 2018 20:23:13 GMT
Don't worry about Mrs Endfeed mate she's has brought a new tool too ! That was pro steve's dildo! It was pink when he first bought it!!! smiley-taunt005 show bum |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 6, 2018 20:24:57 GMT
|
|
|
|
Post by woodbine66 on Jun 6, 2018 20:25:41 GMT
Don't worry about Mrs Endfeed mate she's has brought a new tool too ! That's quite some bung you've got there, but you'll need two if you want to do the vent AND feed.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 6, 2018 20:48:59 GMT
Don't worry about Mrs Endfeed mate she's has brought a new tool too ! That's quite some bung you've got there, but you'll need two if you want to do the vent AND feed.  It's universal the balls are detachable and will bung up anything.  |
|
|
|
Post by battle1066 on Jun 7, 2018 17:04:16 GMT
Thank you for that PB - I've never seen a screwdriver with a built in wire stripper and cable looper before and where do you use square drive bits in the UK? |
|
|
|
Post by dickpuller on Jun 7, 2018 17:18:04 GMT
Thank you for that PB - I've never seen a screwdriver with a built in wire stripper and cable looper before and where do you use square drive bits in the UK? Square nuts/screws are not common here, a Canadian thing I think(?). |
|
|
|
Post by woodbine66 on Jun 7, 2018 17:44:10 GMT
That's quite some bung you've got there, but you'll need two if you want to do the vent AND feed. It's universal the balls are detachable and will bung up anything. I see - balls up. What will they think of next?  |
|
|
|
Post by endfeed on Jun 10, 2018 10:50:49 GMT
Attachment Deletedquick review, got to say good quality good feel when it rachets/no slipping!can use the bits in drill driver too! my reason for buying was to have all the screew driver heads I need with me at all times(in my pocket) and the bits are nice and long. On the negative side, the handle holds 6 screewdriver bits, the 7th stays in the driver and ready to use. This can be annoying because it pokes a hole in your pocket! So I don't carry the 7th torc bit, to stop this happening! The bits are fairly tight in handle to get out,I've oiled them to make it easier! And I feel it's a bit pricey at £15 quid! All said and done I feel it's a great screewdriver! The sparky had his eye on it Friday,got to watch them sticky finger sparkys!!!!!
|
|
|
|
Post by Odd job on Jun 10, 2018 12:36:11 GMT
Can you get replacement bits if and when you need them endfeed ?
|
|
|
|
Post by endfeed on Jun 10, 2018 12:54:13 GMT
Got a builder merchants near me called john Stevens, they sell them,mate.bet the ones from tool station will fit too😎
|
|
|
|
Post by Odd job on Jun 10, 2018 12:59:53 GMT
Got a builder merchants near me called john Stevens, they sell them,mate.bet the ones from tool station will fit too😎 Thank you endfeed. I was looking at the Stanley ratcheting screwdriver too, any ideas if they are any good ? |
|
|
|
Post by endfeed on Jun 10, 2018 13:17:29 GMT
I've got one but it's bit long to cart around and when smaller bit are in it,I find the chamber that holds the bit can't fit in tight places. good quality though..
|
|
|
|
Post by Odd job on Jun 10, 2018 13:32:10 GMT
I've got one but it's bit long to cart around and when smaller bit are in it,I find the chamber that holds the bit can't fit in tight places. good quality though.. Thank you endfeed I'll go with your recommendation and honest review. |
|
|
|
Post by joinerjohn on Jun 10, 2018 13:50:47 GMT
Don't worry about Mrs Endfeed mate she's has brought a new tool too ! Mrs madyedmo got one of them cocks, its connected to me,,, Sadly for you, it's connected to your next door neighbour Mr Patel.  |
|
