Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 29, 2019 21:59:57 GMT
Anyone ever use the Puller poundshop stuff in a can? From a thread a while ago. Tom did a vid on it. Does the stuff in those proper kits do a good few jobs? If you are just doing 15mm mate it lasts awhile. I don't use it much but it's great in these situations, you can also dual freeze at once for changing rad valves etc - handy in a big building where draining down isn't an option. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 29, 2019 22:04:50 GMT
|
|
|
|
Post by cylinderfella on Oct 29, 2019 22:05:15 GMT
Yeah for changing rad valves freezing is probably a bit more reassuring than a bung which involves more climbing up into mouse infested goggle wearing areas!!  |
|
|
|
Post by cylinderfella on Oct 29, 2019 22:06:06 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 29, 2019 22:08:35 GMT
Yes ! I am   |
|
|
|
Post by dickpuller on Oct 30, 2019 7:50:24 GMT
Anyone ever use the Puller poundshop stuff in a can? From a thread a while ago. Tom did a vid on it. Does the stuff in those proper kits do a good few jobs? How very dare you ‘Pullers poundshop stuff’ show some respect to a senior & highly regarded member young man!! Yeah, it works OK Cinders, but nothing like the real thing. I use Pub Co2 cylinders & mats in the real world. The leccy machines are getting cheaper👍 |
|
|
|
Post by cylinderfella on Oct 30, 2019 12:04:52 GMT
Cheers Mr. Puller. |
|
|
|
Post by DIYDafty on Oct 30, 2019 18:59:29 GMT
Nice job. How did you bend the chrome pipe without scraping all the chrome off?
|
|
|
|
Post by dickpuller on Oct 30, 2019 19:04:51 GMT
|
|
|
|
Post by dickpuller on Oct 30, 2019 19:08:13 GMT
Nice job. How did you bend the chrome pipe without scraping all the chrome off? It’s a bit half-arsed with the white plastic clip & flexi. Two formed bends & some CP clips would’ve looked better👍 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 30, 2019 19:42:56 GMT
Nice job. How did you bend the chrome pipe without scraping all the chrome off? Just make sure you warm it up a little Dafty |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 30, 2019 19:43:52 GMT
Nice job. How did you bend the chrome pipe without scraping all the chrome off? It’s a bit half-arsed with the white plastic clip & flexi. Two formed bends & some CP clips would’ve looked better👍  She only wanted the isolation valve and fill valve changed and that's all she was charged for, I just cleaned it up a bit. |
|
|
|
Post by dickpuller on Oct 30, 2019 20:05:11 GMT
It’s a bit half-arsed with the white plastic clip & flexi. Two formed bends & some CP clips would’ve looked better👍 She only wanted the isolation valve and fill valve changed and that's all she was charged for, I just cleaned it up a bit. Must try harder 6 out of 10!! You’d be as well doing it in PF, it would look nice & clean in white, it’ll go with your shitty plastic clip 😂😂😂😂 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 30, 2019 20:11:25 GMT
You're a prick !
|
|
|
|
Post by cylinderfella on Oct 30, 2019 21:32:55 GMT
|
|
She only wanted the isolation valve and fill valve changed and that's all she was charged for, I just cleaned it up a bit.