|
|
Post by rocketmanbkk on May 2, 2021 11:12:04 GMT
It looks ok. I’ve no idea how much yet.
If it’s a fiver then good value
|
|
|
|
Post by rocketmanbkk on May 2, 2021 11:12:35 GMT
It’s £25!!!!
|
|
|
|
Post by woodbine66 on May 2, 2021 11:25:12 GMT
Anything that's starting off low volume like that will be a bit more expensive. Cost of tooling for the plastics manufacturer won't be cheap and a smallish production run means they aren't going to be cheap to make. Not likely to be something that's sold in millions and banged out in a Chinky factory for pennies.
The Pipe Lagger Pro is the same price.
|
|
|
|
Post by battle1066 on May 2, 2021 11:41:12 GMT
Some days I'm so good at it it makes me smile, then other times I ask I'm self did you really turn that shite out and have to redo it.
So. I'd buy one if they get common and priced right to save some wasted time.
|
|
|
|
Post by tomplum on May 2, 2021 15:19:06 GMT
I would't, its a gadget, you could cut the ends a little bit out and it won't matter, and the more you do, the better you will get, getting the lagging on the pipe is the hard bit and, its usually in a tight place in a attic or a tight cupboard and usually dark so. the less tools the better, I use a junior saw,
|
|
|
|
Post by dickpuller on May 2, 2021 16:16:58 GMT
It’s one of Dr Pipes inventions & he makes hem on his 3D Printer. But the major design fault, it only does one fucking size insulation 😂😂😂
The Daft cunt never thought about the various wall sizes😂😂😂😂😂
In fairness he’s a good guy, but is starting to be bit like a lot of these other self-promoting wankers.
|
|
|
|
Post by woodbine66 on May 2, 2021 20:34:42 GMT
, but is starting to be bit like a lot of these other self-promoting wankers. You mean Plumber Pants, don't you Dick? |
|
|
|
Post by dickpuller on May 3, 2021 5:31:11 GMT
, but is starting to be bit like a lot of these other self-promoting wankers. You mean Plumber Pants, don't you Dick? They’re clearly in it for the money & the freebies from manufacturers. James ‘hold your cock tight’ Plumber Pants is a prime case!! |
|
|
|
Post by jimmy1 on May 3, 2021 14:53:30 GMT
I usually find that most gadgets are too expensive or more trouble than they are worth. Just like Hacks videos on you tube. As long as you have a fully fitted out workshop worth 25K you can easily make a 'gadget' to do various things for which the actual tool is available for at a few quid. Have seen a few tips which have been useful such as wrapping PTFE around a pencil to apply when fittings are close to wall. jimmy
|
|
|
|
Post by dickpuller on May 3, 2021 16:17:05 GMT
Make a wooden mitre box, it’ll cost next to nothing👍👍👍
|
|
|
|
Post by cylinderfella on May 7, 2021 11:16:49 GMT
You mean Plumber Pants, don't you Dick? They’re clearly in it for the money & the freebies from manufacturers. James ‘hold your cock tight’ Plumber Pants is a prime case!! Ah yes, I remember that flux gadget he was wetting his pants about a while back. Madness! |
|
|
|
Post by woodbine66 on May 7, 2021 20:54:03 GMT
They’re clearly in it for the money & the freebies from manufacturers. James ‘hold your cock tight’ Plumber Pants is a prime case!! Ah yes, I remember that flux gadget he was wetting his pants about a while back. Madness!
Yes, the Fluxator. He's the only one I've seen using one. Maybe useful if you're fluxing and soldering all day, but not for me. To think we used to use our fingers.  |
|
|
|
Post by cylinderfella on May 7, 2021 23:14:26 GMT
I think I'll get a patent on my compounderator!
Puts jointing compound on without your painted nails getting destroyed!
Now plumbers only need to suffer PMS once a month
(Pre manicure stress)
|
|
|
|
Post by woodbine66 on May 8, 2021 16:06:57 GMT
I think I'll get a patent on my compounderator! Puts jointing compound on without your painted nails getting destroyed! Now plumbers only need to suffer PMS once a month (Pre manicure stress)
I would actually buy one of those if it meant I spilt less Boss White down my Dickies. Leaves the sorts of stains that make people wonder what you've been up to. |
|
|
|
Post by cylinderfella on May 8, 2021 19:43:42 GMT
|
|
