|
|
Post by welshplumber77 on Sept 21, 2021 19:15:08 GMT
Hi all, I got two blocked rad pipes "10mm". I want to try blasting them with a foot pump. Can anyone tell me what sort of adapter I need to connect the foot pump to copper pipe.
Thanks in advance
|
|
|
|
Post by woodbine66 on Sept 21, 2021 20:16:00 GMT
Hello, Welshplumber and welcome to the forum. Tom's done an excellent vid on unblocking microbore. If you have a look at 9.10 on the video you can see the device he made from copper pipe and a tyre valve to attach to the ch system.
Good luck! Micro can be a real pain. I believe you can also connect a foot pump to ch by getting an ordinary rubber tyre valve from a tyre shop and the bulbous end can go under a compression nut on a compression fitting.
Dickpuller will be along any minute with references to sheep.  |
|
|
|
Post by welshplumber77 on Sept 21, 2021 22:01:40 GMT
Woodbine66, thank you for this mate, its really helpful. Will get onto this tomorrow. I love sheep quotes,  |
|
|
|
Post by tomplum on Sept 22, 2021 18:43:53 GMT
Hello welshplumber, glad you like the video and I hope it works for you,  |
|
|
|
Post by cathoderay on Sept 23, 2021 10:11:25 GMT
|
|
|
|
Post by dickpuller on Sept 23, 2021 12:15:14 GMT
Hello, Welshplumber and welcome to the forum. Tom's done an excellent vid on unblocking microbore. If you have a look at 9.10 on the video you can see the device he made from copper pipe and a tyre valve to attach to the ch system.
Good luck! Micro can be a real pain. I believe you can also connect a foot pump to ch by getting an ordinary rubber tyre valve from a tyre shop and the bulbous end can go under a compression nut on a compression fitting.
Dickpuller will be along any minute with references to sheep. Mary had a little lamb, she washed it in the basin, Where it slipped on the soap, And smashed its fucking face in!!! |
|
