TJ
New Member
Posts: 31 
|
Post by TJ on Jul 11, 2016 20:24:24 GMT
Anyone had any joy drying these out? Changed the plate to plate to day and got it wet not much but enough to send it into fault. Did the usual hair drier etc but no joy as the board is a sealed unti and you can't get behind to dry it out. Left the customer with a de humidifier for overnight but think the damage is done 🙏
|
|
|
|
Post by tomplum on Jul 13, 2016 20:03:00 GMT
have you tried changing the low amp fuses on the board ? you might get away with it if you're lucky  |
|
TJ
New Member
Posts: 31
|
Post by TJ on Jul 15, 2016 16:16:03 GMT
I wasn't lucky customer was hard work, so I had to order a new one anyway as he wasn't happy with the drying out overnight like I asked more time on it & I could off saved it tbh. Note to self viessmann boilers are not robust on a par with raven heat
|
|
TJ
New Member
Posts: 31
|
Post by TJ on Jul 15, 2016 16:17:09 GMT
Fuses were fine the boards one unit comes in a panel bad design all round
|
|
|
|
Post by pipeslice on Jul 16, 2016 8:31:06 GMT
Viessmann boilers are a bad product and i stay well clear of them........!
|
|
TJ
New Member
Posts: 31
|
Post by TJ on Jul 16, 2016 18:59:54 GMT
True story lessons learned big time, poorly made and difficult to repair and expensive parts... other than that they're mint
|
|
