|
|
Post by rocketmanbkk on Jul 17, 2016 12:05:00 GMT
Have a lack of confidence moment again as its been a while since I did any plumb
I need to replace a 900 quadrant shower cubicle.
Take old out & put new in
I did one years ago but nowt since
Silicone inside after installing or outside too?
Thx, Rct
|
|
|
|
Post by tomplum on Jul 17, 2016 12:09:52 GMT
the installation instructions usually say, silicone outside only, this is to allow the water to come back into the shower and dry up or go down the drain, if the water is trapped inside it will cause rot in time, But being honest with you I silecone both sides, the custerds are quick to phone and report leaks of any kind and another tip,,never leave the instructions laying around for the custerd to read, qwerty
|
|
|
|
Post by rocketmanbkk on Jul 17, 2016 12:17:29 GMT
Cheers Tom
I'll get it done. Thx again
|
|
|
|
Post by tomplum on Jul 17, 2016 14:46:15 GMT
you're welcome rocket, anytime,  |
|
|
|
Post by jcplumb on Jul 19, 2016 17:46:32 GMT
the installation instructions usually say, silicone outside only, this is to allow the water to come back into the shower and dry up or go down the drain, if the water is trapped inside it will cause rot in time, But being honest with you I silecone both sides, the custerds are quick to phone and report leaks of any kind and another tip,,never leave the instructions laying around for the custerd to read, qwerty Haha that's exactly how I do it - even down to taking the instructions with me  |
|
