|
|
mira jump
Oct 12, 2016 19:24:14 GMT
via mobile
Post by endfeed on Oct 12, 2016 19:24:14 GMT
Im fitting mira jump,i want to fit my pipe work from rear of shower. Instructions say do not fit directly from the back.on pic it looks like you can run pipe work from back and up to inlet.does it just mean dont elbow directly from the back? Photo to follow.. cheers chaps☺
|
|
|
|
mira jump
Oct 12, 2016 19:25:29 GMT
via mobile
Post by endfeed on Oct 12, 2016 19:25:29 GMT
|
|
|
|
Post by tomplum on Oct 12, 2016 19:28:33 GMT
I think its because it will throw the shower body off the wall, I'm not 100% sure of that, but its the only reason i can think of, qwerty
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 12, 2016 19:29:01 GMT
The connection will be on a swivel so you can pipe down into it or up but you can't take it straight into it.
|
|
|
|
Post by battle1066 on Oct 12, 2016 19:30:06 GMT
|
|
|
|
mira jump
Oct 12, 2016 19:37:38 GMT
via mobile
Post by endfeed on Oct 12, 2016 19:37:38 GMT
Sorry to be a thicko☺. So do you think from instructions i can come in from back and pipe up to inlet???
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 12, 2016 19:41:51 GMT
Sorry to be a thicko☺. So do you think from instructions i can come in from back and pipe up to inlet??? Sure can mate. |
|
|
|
mira jump
Oct 12, 2016 19:51:05 GMT
via mobile
Post by endfeed on Oct 12, 2016 19:51:05 GMT
Cheers my duck☺ (from notts if your wondering about the duck)😆😆😆😆
|
|
|
|
Post by wiggers on Oct 12, 2016 23:03:16 GMT
I fit about 5-7 Mira jumps a week I questioned the same issue spoke to the reps about it and even got them to speak to the tech team and they could not answer madness! The shower itself though is great very reliable but not a lot of power on the 8.5kw version
if anyone's thinking about fitting one it comes with a kit but you have to ask or you don't get
it's just a section of 15mm bent copper and a couple of elbows but it saves time if your coming in from the right
good luck
|
|
|
|
Post by rocketmanbkk on Oct 13, 2016 6:37:19 GMT
I'm sure they have to have an elbow into them. Not 100% but it rings a bell
|
|
|
|
Post by tomplum on Oct 13, 2016 7:23:45 GMT
I fit about 5-7 Mira jumps a week I questioned the same issue spoke to the reps about it and even got them to speak to the tech team and they could not answer madness! The shower itself though is great very reliable but not a lot of power on the 8.5kw version if anyone's thinking about fitting one it comes with a kit but you have to ask or you don't get it's just a section of 15mm bent copper and a couple of elbows but it saves time if your coming in from the right good luck top answer wiggers, PM me you postal address and I'll send you a pair of tomplum pens,  |
|
|
|
Post by endfeed on Oct 13, 2016 11:43:44 GMT
I fit about 5-7 Mira jumps a week I questioned the same issue spoke to the reps about it and even got them to speak to the tech team and they could not answer madness! The shower itself though is great very reliable but not a lot of power on the 8.5kw version if anyone's thinking about fitting one it comes with a kit but you have to ask or you don't get it's just a section of 15mm bent copper and a couple of elbows but it saves time if your coming in from the right good luck |
|
|
|
mira jump
Oct 13, 2016 20:48:50 GMT
via mobile
Post by endfeed on Oct 13, 2016 20:48:50 GMT
Cheers wiggers thanks for that😊
|
|
|
|
Post by joinerjohn on Oct 13, 2016 22:34:59 GMT
|
|
|
|
mira jump
Oct 13, 2016 22:46:40 GMT
via mobile
Post by endfeed on Oct 13, 2016 22:46:40 GMT
A up me duck, im just around corner from ilkesten, trowell near to fez pub. Not done goose fair for years,but we wait for the ilkeston fair to come around....😊
|
|
