|
|
iron pipe
Oct 18, 2016 21:28:29 GMT
via mobile
Post by endfeed on Oct 18, 2016 21:28:29 GMT
Gona be doing some work in schools soon,ive got a feeling im gona come up across metal pipe on rads(not done any iron pipe since college) got no iron tools .😕Anyrode my plan is to convert to copper from the steel,can you see any probs with this?can i ptfe a socket onto iron then work it from there?cheers guys...😦
|
|
|
|
Post by tomplum on Oct 18, 2016 21:33:33 GMT
yea course you can 1/2 x 15mm FI to copper no problem,  |
|
|
|
iron pipe
Oct 18, 2016 21:38:24 GMT
via mobile
Post by endfeed on Oct 18, 2016 21:38:24 GMT
Cheers tom☺ hows the bad tooth better i hope???
|
|
|
|
Post by tomplum on Oct 18, 2016 21:45:10 GMT
I went to the dentist, i had to sit there and wait from 9am till 1pm before i got seen, I was so full of pain killers i did not know what day it was, anyrode they filled a little hole and We'll see how it goes, I said " yank the fucker out" they said, " no we don't like to pull teeth out" , yea because if you pull a tooth out, you can't charge any more on that tooth, £50 quid today just to fill a little hole, wait till they want a plumber, I'll make their nose bleed,  |
|
|
|
Post by joinerjohn on Oct 18, 2016 22:49:08 GMT
Less than £50 to have it pulled Tom. Should have stuck to your guns matey.  |
|
|
|
Post by tomplum on Oct 19, 2016 7:30:12 GMT
I'll have to go back, Its still acheaing smiley-face-shaking-fist Grrrrr,
|
|
|
|
Post by clart on Oct 19, 2016 14:23:46 GMT
Gona be doing some work in schools soon,ive got a feeling im gona come up across metal pipe on rads(not done any iron pipe since college) got no iron tools .😕Anyrode my plan is to convert to copper from the steel,can you see any probs with this?can i ptfe a socket onto iron then work it from there?cheers guys...😦 It depends on what has been specified, if they will accept copper then go for it dude. Most schools tend to be iron though. |
|
|
|
Post by rocketmanbkk on Oct 19, 2016 14:42:37 GMT
Have it out. It ain't up to them the cheeky buggers.
|
|
|
|
Post by Mash on Oct 19, 2016 18:11:36 GMT
Gona be doing some work in schools soon,ive got a feeling im gona come up across metal pipe on rads(not done any iron pipe since college) got no iron tools .😕Anyrode my plan is to convert to copper from the steel,can you see any probs with this?can i ptfe a socket onto iron then work it from there?cheers guys...😦 Come across iron a few times, like you said can just PTFE a socket on and run off in copper if they'll have it. I usually use gas tape on there and a bit of LSX just to be sure. |
|
|
|
iron pipe
Oct 19, 2016 19:16:41 GMT
via mobile
Post by endfeed on Oct 19, 2016 19:16:41 GMT
Gona be doing some work in schools soon,ive got a feeling im gona come up across metal pipe on rads(not done any iron pipe since college) got no iron tools .😕Anyrode my plan is to convert to copper from the steel,can you see any probs with this?can i ptfe a socket onto iron then work it from there?cheers guys...😦 It depends on what has been specified, if they will accept copper then go for it dude. Most schools tend to be iron though. |
|
|
|
iron pipe
Oct 19, 2016 19:21:11 GMT
via mobile
Post by endfeed on Oct 19, 2016 19:21:11 GMT
If they do specify it then work will have to treat me to some threading tools. Going on school job tomorrow so wiĺl find out whats in store for me..cheers clart.😊
|
|
