Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 15, 2016 21:45:22 GMT
keyboard warriors, we had one on screwfix telling everyone that you don't need to use inserts in pushfit pipe, smiley-laughing021 |
|
|
|
Post by rocketmanbkk on Feb 17, 2016 14:19:03 GMT
So in an F&E tank it's ok to bung feed & vent?
I was told never to bung vent.
Any advice appreciated
Thx
|
|
|
|
Post by tomplum on Feb 17, 2016 14:24:16 GMT
you HAVE to bung the vent when using the bung method or the airlock won't work, It is important to remove the bung and open the vent when finished, It would't be safe to run the system with the vent blocked,  |
|
|
|
Post by rocketmanbkk on Feb 17, 2016 15:02:02 GMT
Thanks for your reply.
So can I ask, if for example you have a seized gate valve on the hot feed, could you bung the Cwsc outlet to hwsc to create the airlock?
|
|
|
|
Post by tomplum on Feb 17, 2016 15:14:11 GMT
yes but the wieght of water behind that might prove a problem if you're not used to it, I would drain the tank in that situation,  |
|
|
|
Post by rocketmanbkk on Feb 17, 2016 15:34:16 GMT
Ok, thx.
I had a scare with a nasty airlock about 3yrs ago, it shot my confidence tbh. I'm
Gradually getting it back.
|
|
