|
|
Post by joinerjohn on Jan 3, 2017 0:19:41 GMT
I'm already at work  Grrŕrrrrrrrr |
|
|
|
Post by crowsfoot on Jan 3, 2017 7:23:18 GMT
Only 1/2hr to go now though JJ  Been a busy night? I'm just about to get me boots on now  ! It's been a good break though this year. Don't know what I'm doing today (I don't any day really ) I'll just have to see what's come in over the festivities. In the pipeline ahead of jobs what I do know about is a bath that's dropped away from the tiles. I'm also fitting a new soil pipe sometime ahead with the WC in a different position (hopefully I'll get some help with this one) it's so close to the bath that the customer can't get his left leg in and they have to shit sideways  . Good luck to all on their 1st day back. Tappy, |
|
|
|
Post by crowsfoot on Jan 3, 2017 7:28:23 GMT
Yes back tomorrow but it's a paperwork day and a tax issue since it's the end of the month oh and chasing those who owe and don't want to pay on time.  You know every plumber who I've ever known who as gone SE has always said this is "THE" problem. We need a way to make 'em pay up first before any of the work is done. |
|
|
|
Post by rocketmanbkk on Jan 3, 2017 15:49:52 GMT
I fixed the toilet seat today & did another handyman tile job
Other than that I've got nowt.
Spoke to a chap again in Surrey whose a builder & does bathrooms & other plumb so see what he says.
All ok, not desperate yet!!!
|
|
|
|
Post by battle1066 on Jan 3, 2017 21:12:59 GMT
Interesting Job tomorrow - got to repair a tailgate wiring loom on a VW golf - job consist of removing harness from tailgate - removing failed section of harness and splicing in new section for failed section then, refit harness and reassemble vehicle panels,finally function test.
VW dealer wants just short of £500.00 inc vat and three week waiting time before they can do it - customer can't wait as the frosty mornings is making it dangerous to commute.
I'm going the harness repair route as I can guarantee a same day repair with twelve months warranty - £300 everyone's happy - now that's a good start to the new year - additionally one of the tools that will be of great assistance for this type of job is the multi tool donated by PB in the December competition so thank you PB.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 3, 2017 21:22:39 GMT
Interesting Job tomorrow - got to repair a tailgate wiring loom on a VW golf - job consist of removing harness from tailgate - removing failed section of harness and splicing in new section for failed section then, refit harness and reassemble vehicle panels,finally function test. VW dealer wants just short of £500.00 inc vat and three week waiting time before they can do it - customer can't wait as the frosty mornings is making it dangerous to commute. I'm going the harness repair route as I can guarantee a same day repair with twelve months warranty - £300 everyone's happy - now that's a good start to the new year - additionally one of the tools that will be of great assistance for this type of job is the multi tool donated by PB in the December competition so thank you PB. Pictures please!!!  |
|
|
|
Post by battle1066 on Jan 3, 2017 21:27:35 GMT
Just got confirmation of its second job on a Bosch washer Dryer - condensate channel fan so I'll post pictures for both tomorrow.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 3, 2017 21:30:39 GMT
Just got confirmation of its second job on a Bosch washer Dryer - condensate channel fan so I'll post pictures for both tomorrow. Good man!!!!!  |
|
|
|
Post by battle1066 on Jan 3, 2017 21:33:57 GMT
Just got confirmation of its second job on a Bosch washer Dryer - condensate channel fan so I'll post pictures for both tomorrow. Good man!!!!! What you working on tomorrow PB anything interesting? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 3, 2017 21:51:42 GMT
Leaking radiator, blocked hot feed to a kitchen tap (could be interesting), fitting a wireless stat and new pump, measuring up a job swapping a vented cylinder to an unvented cylinder.....one of them days flying about everywhere. greensmilies-010
|
|
|
|
Post by battle1066 on Jan 3, 2017 21:56:34 GMT
Leaking radiator, blocked hot feed to a kitchen tap (could be interesting), fitting a wireless stat and new pump, measuring up a job swapping a vented cylinder to an unvented cylinder.....one of them days flying about everywhere. greensmilies-010 That sounds an action packed day with plenty to go wrong/challenge you - I'm especially Interested in the cylinder exchange and what your going to do about the expansion vessel and system charging loop and pressure monitoring so take a few snaps if you've got the time. |
|
|
|
Post by tomplum on Jan 3, 2017 21:58:25 GMT
I'm gonna have to start tomorrow too, I was going to stay off till monday but i'm getting midered from all angles,  |
|
|
|
Post by battle1066 on Jan 3, 2017 22:01:28 GMT
I'm gonna have to start tomorrow too, I was going to stay off till monday but i'm getting midered from all angles, How did you cut that circle into the side of the Rocket Burner so sweetly without collapsing it Tom? |
|
|
|
Post by tomplum on Jan 3, 2017 22:04:22 GMT
tin snips battle, you could probably do it with sissors or even a sharp knife, |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 3, 2017 22:06:17 GMT
tin snips battle, you could probably do it with sissors or even a sharp knife, Stanley multitool. |
|
Grrŕrrrrrrrr
!
.
