|
|
Post by battle1066 on Jan 19, 2017 17:33:03 GMT
 One of these straight down then 90 left My thoughts are Rocket - Longs you've got an access point for inspection and rodding on the outside - cause some people think toilets are waste disposal units that way you couldn't ever be caught out. |
|
|
|
Post by rocketmanbkk on Jan 19, 2017 17:36:29 GMT
yes rocket that pan connector will be fine under then a bend either way, Its always better to get a rodding eye in somewhere but in todays fancy plumbing designs its not always possible, go for it rocket,  Thx Tom Sorry to ask as it's basic but just don't want to fuck up as he's got another full refurb he offered me |
|
|
|
Post by tomplum on Jan 19, 2017 17:37:31 GMT
no prblem rockey ask all you like,,, smiley-talk002 3 amigos
|
|
|
|
Post by rocketmanbkk on Jan 19, 2017 17:39:37 GMT
So I'll make sure there's a ridding point on the stack. Then alls above board.
Thx all
I'll take picks
|
|
|
|
Post by rocketmanbkk on Jan 19, 2017 17:48:20 GMT
One of these straight down then 90 left My thoughts are Rocket - Longs you've got an access point for inspection and rodding on the outside - cause some people think toilets are waste disposal units that way you couldn't ever be caught out. Thx Battle |
|
|
|
Pipe size
Jan 19, 2017 18:09:47 GMT
via mobile
Post by endfeed on Jan 19, 2017 18:09:47 GMT
Looks like some graft there mate! Are you doing it on your own? Have you got a labourer? I like working on my own i bang absolute radio on and im well away singing along to the 80's😃
|
|
|
|
Post by battle1066 on Jan 19, 2017 18:13:49 GMT
Looks like some graft there mate! Are you doing it on your own? Have you got a labourer? I like working on my own i bang absolute radio on and im well away singing along to the 80's😃 Endfeed how do you rate the Dewalt DAB radio compared to the Makita ? |
|
|
|
Post by endfeed on Jan 19, 2017 18:41:57 GMT
Not used makita one, im like the dewalt radio but when its on dab it looses it signal bit and the volume switch plays up a bit apart from that its ok |
|
|
|
Post by rocketmanbkk on Jan 19, 2017 19:07:25 GMT
There's 2 Greek builders so I ask them to do bits but there's a language barrier
They're nice chaps
|
|
|
|
Post by battle1066 on Jan 19, 2017 19:23:45 GMT
Not used makita one, im like the dewalt radio but when its on dab it looses it signal bit and the volume switch plays up a bit apart from that its ok The Makita one sounds great but once the battery goes flat the display disappears and won't re-show for a few hours? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 19, 2017 19:29:10 GMT
You are doing very well there rocky,,,,,,,top man!!!! |
|
|
|
Post by rocketmanbkk on Jan 19, 2017 19:45:04 GMT
Thx all
It's going well.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 19, 2017 19:47:02 GMT
It looks a good job rocky and was well worth taking on, fire away with any questions you like mate. |
|
|
|
Post by tomplum on Jan 19, 2017 20:23:09 GMT
are they giving you anything up front rockey, posh twats are well known to be nice as pie till the bill goes in, especialy injuns, tread carefully mate, |
|
|
|
Post by rocketmanbkk on Jan 19, 2017 20:41:35 GMT
are they giving you anything up front rockey, posh twats are well known to be nice as pie till the bill goes in, especialy injuns, tread carefully mate, It's through a building company so I just turn up with tools. I did a parts list today for tomorrow & he told me to put flux, silicone spray & a tin of map gas on it! So that's ok. I'm quite happy as it's pipework from a combi. Water switches off ok. I'll do the hot/cold to basin, shower & toilet tomorrow, new toilet waste & put condensate in it, do basin waste & get a hole in the wall to get toilet waste out. Then I'll need to put the toilet waste in stack & also the 40mm shower waste. What I was going to do was to do the basin waste in 32mm but then put that into a 40mm pipe as that's what the shower will go into then that needs to go out the wall & into the stack too. |
|
