|
|
Post by tomplum on Jan 24, 2017 20:48:38 GMT
let us know what you think of them aj,  |
|
|
|
Post by dickpuller on Jan 24, 2017 20:53:56 GMT
hi dickpuller any chance of the exact hilmor cutters you have coz they always going on ebay. Here you go aj Attachment Deleted |
|
|
|
Post by dickpuller on Jan 24, 2017 20:59:51 GMT
I think I'd have a punt & buy these for just over a tenner. Of course with my Hilmor set I don't need them, but you can see the similarities. |
|
|
|
Post by aj on Jan 24, 2017 21:05:17 GMT
|
|
|
|
Post by dickpuller on Jan 24, 2017 21:36:13 GMT
I think they're copper cutters aj. Even used they're still a bargain. |
|
|
|
Post by Mash on Jan 25, 2017 1:20:22 GMT
J.G for 15-22 cutter don't even bother with the silverline ones or others with the straight edge blade, fucking pony. Might as well slam the pipe in your van door, would probably cut it better than those ones do. I have one of the monument ratchet style cutters, had it a couple years now still cuts good. There's a certain nack to it thought if you think you're gonna just ratchet straight through it from the get go it doesn't work, trick is ratchet until it just flexes the pipe and then rotate it a quarter turn and it will pierce the wall and then ratchet and it will fly through. Works good on the protecta line mains gear as well.
|
|
|
|
Post by dcoxplumbing on Jan 25, 2017 12:45:41 GMT
I find an old wood saw is best for cutting solvent weld waste pipe - easier to get a straight cut than by using a hacksaw. Never bothered with proper cutters.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 25, 2017 17:05:45 GMT
J.G for 15-22 cutter don't even bother with the silverline ones or others with the straight edge blade, fucking pony. Might as well slam the pipe in your van door, would probably cut it better than those ones do. I have one of the monument ratchet style cutters, had it a couple years now still cuts good. There's a certain nack to it thought if you think you're gonna just ratchet straight through it from the get go it doesn't work, trick is ratchet until it just flexes the pipe and then rotate it a quarter turn and it will pierce the wall and then ratchet and it will fly through. Works good on the protecta line mains gear as well. I like the " might as well slam it in the van door" brilliant mash and true.  |
|
|
|
Post by battle1066 on Jan 25, 2017 17:19:08 GMT
J.G for 15-22 cutter don't even bother with the silverline ones or others with the straight edge blade, fucking pony. Might as well slam the pipe in your van door, would probably cut it better than those ones do. I have one of the monument ratchet style cutters, had it a couple years now still cuts good. There's a certain nack to it thought if you think you're gonna just ratchet straight through it from the get go it doesn't work, trick is ratchet until it just flexes the pipe and then rotate it a quarter turn and it will pierce the wall and then ratchet and it will fly through. Works good on the protecta line mains gear as well. I like the " might as well slam it in the van door" brilliant mash and true. Yes I thought that was a top quote and laughed out aloud! laughing-dog-smiley-emoticon |
|
