Post by aj on Jan 24, 2017 15:33:05 GMT
hi one shot drain delivered today and used on blocked walk in shower.i followed the instructions to the letter but its still blocked. these are the instructions i used below. my question is how do plumbers use it? also i took the top cover off which i undid two screws then i took the cup out and then there was water and a bit of crap which i removed.i poured 250ml per instructions below.my question is not all the 250ml went down the pipe as i could still see majority of it in drain? is this nomal ?shouli repeat exact process? or should i use pour more of the stuff down ?many thanks
''To clear toilets and floor drains; Use about 250ml initially and allow to stand for 5 minutes. Carefully add 250ml of cold water and allow to stand for a further 5 minutes and then flush. Repeat if necessary.
To use as a preventitive measure: Add 100ml of One Shot per month in each drain. For best results use early in the morning''
''To clear toilets and floor drains; Use about 250ml initially and allow to stand for 5 minutes. Carefully add 250ml of cold water and allow to stand for a further 5 minutes and then flush. Repeat if necessary.
To use as a preventitive measure: Add 100ml of One Shot per month in each drain. For best results use early in the morning''
