Post by jcplumb on Feb 15, 2017 12:20:14 GMT
Thinking of using this Big boy fibre glass resin kit to repair a 4'' crack in a bath tomorrow. The crack has gone all the way through even though it's almost invisible from the inside.
Anyone used similar?
Also thinking of drilling a 4mm hole at each end of the crack to make it harder for the crack to just get bigger if you know what I mean, will fill the holes with resin when doing the repair.
The customer isn't too fussed about appearance but the crack is on the closest side of the bath so can't see it 'til you get in the bath anyway.
It's a customer I've worked for a few times before and I'll be doing a full bathroom refurb for them in a year or so I suggested repairing the crack rather than replacing the bath.
Just after any pointers really from anyone who's done this before.
Anyone used similar?
Also thinking of drilling a 4mm hole at each end of the crack to make it harder for the crack to just get bigger if you know what I mean, will fill the holes with resin when doing the repair.
The customer isn't too fussed about appearance but the crack is on the closest side of the bath so can't see it 'til you get in the bath anyway.
It's a customer I've worked for a few times before and I'll be doing a full bathroom refurb for them in a year or so I suggested repairing the crack rather than replacing the bath.
Just after any pointers really from anyone who's done this before.
