|
|
Post by rocketmanbkk on Feb 16, 2017 15:11:31 GMT
Friends
I posted about my tap & found the valve etc.
Anyway, it's not the tap valve at all, it's the handle that wiggles a mm or so.
I've taken it off & there's a small screw inside but it's tight as can be.
Any thoughts? It's not a huge issue but it does annoy me
Cheers all
|
|
|
|
Post by jcplumb on Feb 16, 2017 16:16:17 GMT
Mine's exactly the same, they're swirl taps from poofix, one's solid and no matter what I do the other one wobbles a bit, just the handle, I thought about something like epoxy resin, but it would make the handle near impossible to get off if it ever needed a washer change. Been like that since day 1 and only started to bug me after the 1 year return cut off... If I get a basin tap swap for a customer I'll recommend the swirl ones and once paid for will swap bits with my taps then return them  |
|
|
|
Post by rocketmanbkk on Feb 16, 2017 17:28:40 GMT
My one cost me a few quid. As I say no emergency but it does wind me up.
|
|
|
|
Post by rocketmanbkk on Feb 16, 2017 19:17:51 GMT
It seems that be fixed
No small dripping
I cleaned the thread, put it back on.
Fingers crossed
|
|
|
|
My tap
Feb 18, 2017 8:45:37 GMT
Post by Pro Steve on Feb 18, 2017 8:45:37 GMT
Rocketman get a professional plumber.
|
|
|
|
Post by rocketmanbkk on Feb 18, 2017 9:23:20 GMT
Rocketman get a professional plumber. Fuck off & start a life loser |
|
|
|
Post by tomplum on Feb 18, 2017 9:25:39 GMT
you tell him rockey, the sad twat,,,,, kick-in-the-balls
|
|
Deleted
Deleted Member
Posts: 0
|
My tap
Feb 18, 2017 15:33:09 GMT
Post by Deleted on Feb 18, 2017 15:33:09 GMT
|
|
