|
|
Post by rocketmanbkk on Mar 3, 2017 11:22:31 GMT
Hello Friends I've been asked to plums the wash Mach waste. All I can think of doing is to put a 40mm T connection at the bottom of the cupboard where it goes through the wall, then run 40mm pipe led along the inside of the unit, 90 bend to go towards the machine then 90 vertically up behind the machine where the hose can go in the top & down. Any thoughts if it will work? Cheers all Pics from custard    |
|
|
|
Post by tomplum on Mar 3, 2017 12:06:44 GMT
|
|
|
|
Post by rocketmanbkk on Mar 3, 2017 12:11:07 GMT
I looked at a new fitting but the hose is too short.
|
|
|
|
Post by tomplum on Mar 3, 2017 12:16:55 GMT
|
|
|
|
Post by tomplum on Mar 3, 2017 12:19:00 GMT
|
|
|
|
Post by rocketmanbkk on Mar 3, 2017 12:27:45 GMT
Ok, so I can connect hose to hose. Nice one,
Thx Tom
|
|
|
|
Post by tomplum on Mar 3, 2017 12:33:20 GMT
you're welcome rocky as always,,  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 3, 2017 17:46:04 GMT
I didn't know they did them connectors Tom I always ended up using a MDPE pipe insert and cutting the collar off it. |
|
|
|
Post by joinerjohn on Mar 3, 2017 19:01:56 GMT
Is the gas meter in the unit next to where the washing machine is? (looks like it from the pics) If it is, surely the outlet hose is long enough to connect into the sink waste?
|
|
|
|
Post by tomplum on Mar 3, 2017 20:15:58 GMT
I didn't know they did them connectors Tom I always ended up using a MDPE pipe insert and cutting the collar off it. now thats a good tip if ever there was one,,,, |
|
|
|
Post by endfeed on Mar 3, 2017 20:28:42 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 3, 2017 20:35:57 GMT
They're good endfeed too. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 3, 2017 20:36:59 GMT
I didn't know they did them connectors Tom I always ended up using a MDPE pipe insert and cutting the collar off it. now thats a good tip if ever there was one,,,, Plumbers always find away Tom. |
|
|
|
Post by tomplum on Mar 3, 2017 20:41:12 GMT
we do indeed, I've used a piece of copper pipe before now, |
|
|
|
Post by rocketmanbkk on Mar 3, 2017 21:52:38 GMT
Is the gas meter in the unit next to where the washing machine is? (looks like it from the pics) If it is, surely the outlet hose is long enough to connect into the sink waste? No, it's to the left, so a double units length, then left again, single unit length then the wash machine |
|
