Post by Astra on Mar 27, 2017 20:48:38 GMT
Went to a job today ..the guy screwed through a water pipe 3/4", so cut out bad section used a piece 0f 22mm pipe replace section
used 2-off 22mm comp joints using 2-off 22mm olives & 2-off 3/4" olives done up using PTFE ,,, system is Combi boiler re-pressurized
system all look good cleared up all tools just checked again very slight weep on one joint 3/4" side tried to nip up no luck got to go back
and try again tomorrow is there anything else I can try ( Method ) you guy's use
used 2-off 22mm comp joints using 2-off 22mm olives & 2-off 3/4" olives done up using PTFE ,,, system is Combi boiler re-pressurized
system all look good cleared up all tools just checked again very slight weep on one joint 3/4" side tried to nip up no luck got to go back
and try again tomorrow is there anything else I can try ( Method ) you guy's use
