Astra
Full Member
Posts: 219 
|
Post by Astra on Aug 18, 2017 19:19:40 GMT
Hi Guy's isolation valves ball o fix type who sells which are the best on the market (ie) last longer than 6 months better than what shitfix sell What do you guy's use  ?  |
|
|
|
Post by Plumberboy on Aug 18, 2017 19:40:00 GMT
Hi Guy's isolation valves ball o fix type who sells which are the best on the market (ie) last longer than 6 months better than what shitfix sell What do you guy's use ? PEGLER are good mate but not cheap, if I'm doing big installs I just buy non branded packs of 10. |
|
|
|
Post by tomplum on Aug 18, 2017 20:39:43 GMT
I also use shitfix isos for domestic, we only put them there for our benefit, so we're not running from room to room if somethings pissing out, So cheap is good, but industrial or commercial, where you might depend on a sure stop, go pegler,  |
|
|
|
Post by endfeed on Aug 18, 2017 20:44:21 GMT
Ive been using the full bore ones and not had any problems(touch wood) we have to use tec tight alot at work and the ball (middle part) shot out!! so I dont recommended them buggers  |
|
|
|
Post by tomplum on Aug 18, 2017 20:46:50 GMT
thats happened to me endfeed, some cunt fitted one the wrong way, always fit them as the arrow shows, or, GUSH,,,,  |
|
|
|
Post by endfeed on Aug 18, 2017 21:16:13 GMT
Tec tight pro is what we ve been using tom, but for some weird reason there are no arrows showing which way to fit then  ...if you look down the valve there is a white collar and that is the side that blew out on me,so I now fit that towards the flow side..not sure if thats right or not? but not had any more blow outs since..for the price of them you would expect a arrow to show which way jvtsl41E0pOEtzQWTQLo thumbs down |
|
|
|
Post by tomplum on Aug 18, 2017 21:23:03 GMT
never used tectight endfeed, too expensive for me, I go for cheap every time, of course if your firm is buying, fair enuff, I'll watch out for them in future |
|
Astra
Full Member
Posts: 219
|
Post by Astra on Aug 19, 2017 21:03:09 GMT
Thanks Guy's great info & knowledge as usual thanks for your time !!!
|
|
|
|
Post by tomplum on Aug 19, 2017 21:08:39 GMT
you're most welcome astra, |
|
? 
...if you look down the valve there is a white collar and that is the side that blew out on me,so I now fit that towards the flow side..not sure if thats right or not? but not had any more blow outs since..for the price of them you would expect a arrow to show which way jvtsl41E0pOEtzQWTQLo thumbs down