|
|
Post by tomplum on Aug 26, 2017 19:06:14 GMT
he's been busy today and sent me some pics of an underground repair he did, Attachment DeletedAttachment Deletedas you can see the black alkathene was damaged, So I think he's used two transiton fitting to use the blue 25mm pipe to repair the pipe, |
|
|
|
Post by battle1066 on Aug 26, 2017 19:20:31 GMT
Mind that pipework doesn't look as though it's very deep in the ground or is it an optical illusion?
|
|
|
|
Post by Plumberboy on Aug 26, 2017 19:23:36 GMT
he's been busy today and sent me some pics of an underground repair he did, as you can see the black alkathene was damaged, So I think he's used two transiton fitting to use the blue 25mm pipe to repair the pipe, That's correct Tom and I get my transition fittings from the link, I always have some handy. eastangliaplumbingsupplies.co.uk |
|
|
|
Post by Plumberboy on Aug 26, 2017 19:25:15 GMT
Mind that pipework doesn't look as though it's very deep in the ground or is it an optical illusion? Its not that deep battle you're right.  |
|
|
|
Post by battle1066 on Aug 26, 2017 19:32:36 GMT
Mind that pipework doesn't look as though it's very deep in the ground or is it an optical illusion? Its not that deep battle you're right. Looking at the job and how you've made it look easy, and taking into consideration today's weather, that would be the type of job we should all be happy to go to! |
|
|
|
Post by tomplum on Aug 26, 2017 19:37:20 GMT
I was going to put that link in the 'links' board, but its already there, but thanks again for the pics and link PB,,  |
|
|
|
Post by endfeed on Aug 26, 2017 19:49:59 GMT
Do those transition fittings slip up the pipe? Or was there enough flex in plastic pipe to make repair?? smiley-talk002 3 amigos
|
|
|
|
Post by tomplum on Aug 26, 2017 19:54:42 GMT
those tranition fitting are brill endfeed, yes they will slide, they get you out of a lot of impossible situations, |
|
|
|
Post by endfeed on Aug 26, 2017 20:12:02 GMT
Do they work on lead??are they same as philmac fittings, tom? |
|
|
|
Post by tomplum on Aug 26, 2017 20:37:54 GMT
yes endfeed they work on size, any pipe, lead, iron,galv,copper,plastic and stainless, |
|
|
|
Post by Plumberboy on Aug 26, 2017 20:52:02 GMT
they are the dogs dangles endfeed, I've used them on really old iron mains and lead and they always seal perfectly mate, you get about a 6mm tolerance between fitting sizes...15-21..21-27 and so on . |
|
|
|
Post by rocketmanbkk on Aug 27, 2017 14:18:32 GMT
Good job
|
|
