|
|
Post by tomplum on Mar 2, 2016 12:11:07 GMT
|
|
|
|
Post by tomplum on Mar 2, 2016 12:12:36 GMT
|
|
|
|
Post by tomplum on Mar 2, 2016 12:14:30 GMT
|
|
|
|
Post by tomplum on Mar 2, 2016 12:17:53 GMT
then reassemble and test the termacouple and pilot, Attachment Deletedto test the thermacoiuple, turn the grey knob clockwise a quarter turn the pilot will go out, then wait, there should be at least 20 seconds before you hear a click, thats the thermacouple 'letting go' of the magnet inside, if there's less than 10 seconds, replace the thermacouple, the pilot should be blue with no yellow, if there's yellow replace the injector, the bit of yellow you see in this pilot is a bit of carbon on the t/couple, i cleaned that off, |
|
|
|
Post by tomplum on Mar 2, 2016 12:19:00 GMT
check the flame picture Attachment Deletedthe flame needs to be mostly blue with no 'candling' flames,the flame here is pretty good the camera does't do justice to the picture, |
|
|
|
Post by tomplum on Mar 2, 2016 12:20:19 GMT
|
|
|
|
Post by tomplum on Mar 2, 2016 12:31:17 GMT
|
|
|
|
Post by rocketmanbkk on Mar 2, 2016 16:35:33 GMT
Nice job.
|
|
|
|
Post by battle1066 on Mar 2, 2016 17:24:33 GMT
Plenty educational pointers there Tom - did this set up have any hidden screws for removing the fire surround?
|
|
|
|
Post by tomplum on Mar 2, 2016 17:26:45 GMT
the fire surround just hooks on the main fire body which screws to the wall,
|
|
