|
|
Post by rocketmanbkk on Sept 25, 2017 18:42:29 GMT
Howdy all
What size drill do you use to go through the wall? 15mm pipe obviously. Not fitted on before. Just tap with built in check valve, ISO valve & bit of pipe. Should be ok. Fingers crossed 🤞
Any pitfalls?
Do you have a vid on it Tom? Couldn't see one.
Cheers all
Rct
|
|
|
|
Post by crowsfoot on Sept 25, 2017 19:17:49 GMT
You seem to have it under control Rocky.
1/2" drill will be fine I wouldn't drill a 3/4" hole for it personally.
|
|
|
|
Post by tomplum on Sept 25, 2017 19:17:58 GMT
a 20mm hole is better rocky it will jam in a 15mm hole, its a striaght forward job rocky, I can't see a man of your talents getting stuck,  |
|
|
|
Post by rocketmanbkk on Sept 25, 2017 19:20:50 GMT
Cheers
I'll buy a 20mm bit & drill away.
Do you go inside out or vice versa?
I see some bricks blown. I'd like to do a half decent job.!
|
|
|
|
Post by tomplum on Sept 25, 2017 19:35:22 GMT
Yea, go outside in, you can always mend the wall inside or if its behind a unit, it won't matter,
|
|
|
|
Post by rocketmanbkk on Sept 25, 2017 19:37:18 GMT
Yea, go outside in, you can always mend the wall inside or if its behind a unit, it won't matter, Thx Tom. I thought as much😗 |
|
|
|
Post by rocketmanbkk on Sept 25, 2017 19:55:40 GMT
Here's a pic from the under sink I've just been sent. Do you think I can link the pipe into the blue w/m valve on the right as it's not used? Take it off, fit ISO & go through wall.  |
|
|
|
Post by crowsfoot on Sept 25, 2017 20:01:24 GMT
Yes definitely, looks like it was made/left just for the job  . |
|
|
|
Post by endfeed on Sept 25, 2017 20:17:02 GMT
Howdy all What size drill do you use to go through the wall? 15mm pipe obviously. Not fitted on before. Just tap with built in check valve, ISO valve & bit of pipe. Should be ok. Fingers crossed 🤞 Any pitfalls? Do you have a vid on it Tom? Couldn't see one. Cheers all Rct Dont forget to sleeve with 22mm pipe through brick work mate  . |
|
|
|
Post by tomplum on Sept 25, 2017 20:36:26 GMT
yep thats the way to go rocky,  |
|
|
|
Post by Plumberboy on Sept 25, 2017 20:43:09 GMT
Howdy all What size drill do you use to go through the wall? 15mm pipe obviously. Not fitted on before. Just tap with built in check valve, ISO valve & bit of pipe. Should be ok. Fingers crossed 🤞 Any pitfalls? Do you have a vid on it Tom? Couldn't see one. Cheers all Rct Dont forget to sleeve with 22mm pipe through brick work mate . I'd only sleeve gas pipes mate. |
|
|
|
Post by tomplum on Sept 25, 2017 20:48:15 GMT
rules is for,,,,,,,,,,,,,,,,,,,,,, |
|
|
|
Post by Plumberboy on Sept 25, 2017 20:49:42 GMT
rules is for,,,,,,,,,,,,,,,,,,,,,, |
|
|
|
Post by endfeed on Sept 25, 2017 20:51:14 GMT
Stevo pro said sleeve water pipes too  surely he cant be wrong  |
|
|
|
Post by endfeed on Sept 25, 2017 20:51:57 GMT
rules is for,,,,,,,,,,,,,,,,,,,,,, Fools |
|
. 
. 
surely he cant be wrong 