|
|
Post by Plumberboy on Oct 15, 2017 20:27:52 GMT
Fucking women. smiley-finger005
|
|
|
|
Post by rocketmanbkk on Oct 15, 2017 20:36:03 GMT
You’re all in the dog house
|
|
|
|
Post by tomplum on Oct 15, 2017 20:46:01 GMT
right, thats got rid of my missus, she can't work a puter but she has a ipad, So i've deleted my site off the ipad and blocked it from here,
so go figure how to get out of that my dearest smiley-finger005
|
|
|
|
Post by Plumberboy on Oct 15, 2017 20:52:09 GMT
right, thats got rid of my missus, she can't work a puter but she has a ipad, So i've deleted my site off the ipad and blocked it from here, so go figure how to get out of that my dearest   . I've just ordered some of them pipeslice's you recommended Tom and the pump pliers.  |
|
|
|
Post by Plumberboy on Oct 15, 2017 21:23:31 GMT
I used plumbergirl bank card. |
|
|
|
Post by tomplum on Oct 15, 2017 21:30:05 GMT
all good stuff PB, cheap is good and less painful when/if you lose them, I'm getting worse at lossing stuff, eyesight and memory are to blame, I thinking of painting all my tools with fluersent paint, so they stand out,
Pipe slices are basterds for rolling, This happens to me regularly, you cut a pipe under the floorboards, then the water comes out, so the priority shifts to stemming the flow of water and the pipe slice rolls off under the boards, If you need another cut, you know where its gone and retrieve it, But if you don't need another cut, it gets forgot about until the next cut, which might be on the next job, so its not worthwhile leaving a job to go looking under boards you did yesterday and so another pipeslice is lost, I've lost 100's like that, smiley-sad056 nay
|
|
|
|
Post by Plumberboy on Oct 15, 2017 21:38:11 GMT
all good stuff PB, cheap is good and less painful when/if you lose them, I'm getting worse at lossing stuff, eyesight and memory are to blame, I thinking of painting all my tools with fluersent paint, so they stand out, Pipe slices are basterds for rolling, This happens to me regularly, you cut a pipe under the floorboards, then the water comes out, so the priority shifts to stemming the flow of water and the pipe slice rolls off under the boards, If you need another cut, you know where its gone and retrieve it, But if you don't need another cut, it gets forgot about until the next cut, which might be on the next job, so its not worthwhile leaving a job to go looking under boards you did yesterday and so another pipeslice is lost, I've lost 100's like that,  The last ones I brought were plastic ones that clip around the whole pipe they cut well but fuck the end of the pipe up when you're using endfeed as they distort the pipe. I too have lost many Tom.  |
|
|
|
Post by tomplum on Oct 15, 2017 21:45:18 GMT
|
|
|
|
Post by Plumberboy on Oct 15, 2017 21:51:12 GMT
That's the ones Tom. They can be hit and miss pipeslices as sometimes you get them and they don't bite in enough and you're turning the twats for ages. smiley-chores037 binsout |
|
|
|
Post by tomplum on Oct 15, 2017 21:56:23 GMT
yea I've had those ' turn forever' pipe slices, but those lastest ones I got lock in and cut good, ( up to now) anyway, i would't recommend otherwise, |
|
|
|
Post by Plumberboy on Oct 15, 2017 21:59:14 GMT
yea I've had those ' turn forever' pipe slices, but those lastest ones I got lock in and cut good, ( up to now) anyway, i would't recommend otherwise,  I'm sure them and the pliers will be superb mate, I trust your review. |
|
|
|
Post by tomplum on Oct 15, 2017 22:02:06 GMT
I shoot from the hip PB, there's nothing in it for me, I tell it like it is, I know you do the same, this is a ' no bullshit ' site, |
|
|
|
Post by Plumberboy on Oct 15, 2017 22:08:17 GMT
I shoot from the hip PB, there's nothing in it for me, I tell it like it is, I know you do the same, this is a ' no bullshit ' site, That's how it should be too, if its shit we'll tell you its shit and I've brought well known brand tools before now that are shite, people buy into brand names thinking they are getting quality but its not always the case. |
|
|
|
Post by tomplum on Oct 15, 2017 22:16:25 GMT
too true PB, we know the titan drill is exceptional good for £60,, but others will not buy it cos its cheap, they buy a boshe at £400,, Ha Ha suckers, but then again there are silverline, they are cheap but absolute crap, You have to know which is worth the money and which is not worth a wank, If you want to spend money there is always a desk jockey willing to take your money, he's not going to tell it like it is, Only on here do you get no bullshit advise, |
|
|
|
Post by Plumberboy on Oct 15, 2017 22:21:41 GMT
I love them titan drills they take some serious abuse and keep coming back for more, I push mine well beyond the MI's limits and it just keeps going the amount of core drilling I've done with it is amazing. |
|
.
