|
|
Post by rocketmanbkk on Oct 26, 2017 16:29:31 GMT
Going to fit an unvented tomorrow with mate.
It’ll be my first one.
|
|
|
|
Post by tomplum on Oct 26, 2017 16:58:21 GMT
there's a first time for everything Rockey
|
|
|
|
Post by endfeed on Oct 26, 2017 18:37:19 GMT
Going to fit an unvented tomorrow with mate. It’ll be my first one. Plenty of pics mate foto  |
|
|
|
Post by rocketmanbkk on Oct 26, 2017 19:47:09 GMT
Yes, I’ll take some if I can
|
|
|
|
Post by crowsfoot on Oct 26, 2017 19:56:37 GMT
Conversion or replacement rocky?
|
|
|
|
Post by rocketmanbkk on Oct 26, 2017 19:58:20 GMT
Conversion or replacement rocky? Conversion I believe |
|
|
|
Post by crowsfoot on Oct 26, 2017 20:04:12 GMT
It'll be quite an interesting job rocky, you'll enjoy it.
|
|
|
|
Post by rocketmanbkk on Oct 26, 2017 20:12:20 GMT
Cheers CF
Had a read up. I hope to do a few then once I know how they go I’ll do the 1 day course.
|
|
|
|
Post by crowsfoot on Oct 26, 2017 20:20:47 GMT
The course is not difficult rocky.
Is it a pre-plumbed cylinder that you're fitting?
|
|
|
|
Post by rocketmanbkk on Oct 27, 2017 5:46:25 GMT
The course is not difficult rocky. Is it a pre-plumbed cylinder that you're fitting? I’ve no idea CF. I’ll find out soon enough. Should be ok. I’m not alone so I’ll see how it goes. Report back later |
|
|
|
Post by rocketmanbkk on Oct 27, 2017 14:21:21 GMT
All went ok 30l wall hung. All good, not all pipework is mine!  |
|
|
|
Post by battle1066 on Oct 27, 2017 15:21:01 GMT
Hi Rocket another interesting install for you. Now a question for you to educate me, what's the silver item with the cable wrapped around it, I assumed it's a none return valve but is an odd shape for that?
|
|
|
|
Post by Plumberboy on Oct 27, 2017 15:31:51 GMT
Hi Rocket another interesting install for you. Now a question for you to educate me, what's the silver item with the cable wrapped around it, I assumed it's a none return valve but is an odd shape for that? Its a PRV battle. |
|
|
|
Post by rocketmanbkk on Oct 27, 2017 15:32:07 GMT
Hi Rocket another interesting install for you. Now a question for you to educate me, what's the silver item with the cable wrapped around it, I assumed it's a none return valve but is an odd shape for that? Hello battle It’s the pressure vessel. The tie was like a jubilee clip. Wrapped around the vessel & through the bracket. The pic was taken before the tundish was complete. It’s a 30l & takes 21 mins to heat up. The chap only uses it to wash up & basin. No bath as he’s got an electric shower. The unit was £450 inc. some pipe so not cheap. |
|
|
|
Post by Plumberboy on Oct 27, 2017 15:32:54 GMT
Nice job rocky.  |
|
