|
|
Post by tomplum on Nov 7, 2017 18:27:54 GMT
found another supplier of pipe slices, 15mm and 22mm for £7.99, i've ordered some and let you know if they good or shite reason i was looking,,,you guessed it, I've lost my others, they rolled under the boards and went into a lamanated section in the bedroom, fuck,,, sad 1 anyrode link,, pipe slices if they're good I'll put it in the links board, |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 7, 2017 18:33:35 GMT
found another supplier of pipe slices, 15mm and 22mm for £7.99, i've ordered some and let you know if they good or shite reason i was looking,,,you guessed it, I've lost my others, they rolled under the boards and went into a lamanated section in the bedroom, fuck,,,  anyrode link,, pipe slices if they're good I'll put it in the links board, Well you didn't have the other ones long Tom.  its a fucker when that happen, good job they are cheap.  |
|
|
|
Post by tomplum on Nov 7, 2017 18:37:14 GMT
I know it broke my heart when they rolled off past where i could reach, I tried for an hour to wressle them back, then thought , why bother, I'll just get some more for the money, they were still working good, that will be a good fine for a future plumber,, |
|
|
|
Post by rocketmanbkk on Nov 7, 2017 18:39:31 GMT
I’ll be interested Tom
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 7, 2017 18:43:44 GMT
I know it broke my heart when they rolled off past where i could reach, I tried for an hour to wressle them back, then thought , why bother, I'll just get some more for the money, they were still working good, that will be a good fine for a future plumber,,  That's the only trouble with pipe slices they roll really really well.  |
|
|
|
Post by endfeed on Nov 7, 2017 19:26:29 GMT
I'm sure this was one of your tips tom, extendable magnet,like a radio aerial. Pound shop as em with light on... retrieved mine few times👌
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 7, 2017 19:36:42 GMT
I did a job at a garden centre the builders were converting an old like school hut into a staff room, I had to run a 40mm waste pipe out so got my holesaw on the drill and drilled through the inner wall and then the fucker fell out off the drill and went between the cavity. |
|
|
|
Post by endfeed on Nov 7, 2017 19:46:58 GMT
Could of been worse ,could of gone down a shit stack💩 nearly done it a few times!!!!!
|
|
|
|
Post by tomplum on Nov 7, 2017 20:25:04 GMT
I'm sure this was one of your tips tom, extendable magnet,like a radio aerial. Pound shop as em with light on... retrieved mine few times👌 thats true endfeed but,,the pipe slices are made from non ferous metal so the only way is to get on the screw that holds them together, And I could't in this case, Its the one that got away,  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 7, 2017 20:41:14 GMT
If we used silverline tools I bet we'd never lose the fuckers. laughing-dog-smiley-emoticon
|
|
|
|
Post by joinerjohn on Nov 7, 2017 21:48:03 GMT
A top tip for pipe slices. When putting them down, place them on their side.  |
|
|
|
Post by tomplum on Nov 7, 2017 22:00:54 GMT
top tip to joiners,,,make the fuckin' floors level,,,, |
|
|
|
Post by joinerjohn on Nov 7, 2017 22:08:08 GMT
|
|
|
|
Post by tomplum on Nov 7, 2017 22:11:51 GMT
the floors where i take floorboards up in Wigan are still done in wood |
|
|
|
Post by tomplum on Nov 7, 2017 22:16:12 GMT
anyrode JJ to change the subject slightly, I'm looking for a new, or used yamaha keyboard, can you recommend a good but cheap value for the money model ?
|
|
its a fucker when that happen, good job they are cheap. 
