Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 17, 2017 20:25:00 GMT
|
|
|
|
Post by endfeed on Nov 17, 2017 20:29:38 GMT
You've had the big guns out then p.b💪
|
|
|
|
Post by tomplum on Nov 17, 2017 20:32:44 GMT
yep my one is still working good after being grossly missused for over 6 years, coring 6 inch holes knocking down walls, digging up concrete, a real mans tools and the cost was about £49.99 when i bought it, Its outlived quite a few core bits and still going strong, very highly recommended by me,  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 17, 2017 20:40:54 GMT
They are fantastic value for money  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 17, 2017 20:42:35 GMT
You've had the big guns out then p.b💪 I like to make noise and a mess  |
|
|
|
Post by crowsfoot on Nov 17, 2017 21:26:14 GMT
Some hard dusty work you've got there PB.
Is that an heating manifold?
I've never seen one on small bore heating before.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 17, 2017 21:33:04 GMT
Some hard dusty work you've got there PB. Is that an heating manifold? I've never seen one on small bore heating before. It is a heating manifold Tappy the pipes you see were in a cupboard and will be once again when the refurb is finished. It feeds 4 rads ground floor and another 4 rads ground floor are feed from another manifold on the opposite side of the house. |
|
|
|
Post by endfeed on Nov 17, 2017 22:21:49 GMT
How come you had to did em up?were they in way of the new build
|
|
|
|
Post by dickpuller on Nov 17, 2017 22:29:34 GMT
Which one has the Safety clutch chaps?!👍
|
|
|
|
Post by tomplum on Nov 17, 2017 22:33:12 GMT
they all have Dick, well mine has and it was £49.99 a few years ago, I would not attenpt a 6 inch hole without a clutch,  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 17, 2017 22:33:39 GMT
How come you had to did em up?were they in way of the new build Old rads were in the way of new alterations and new bigger rads going in, UFH going in new big kitchen too so I had to take a flow feed from in the airing cupboard and down into the utility room and the return I'll tee into one of the 22mm at the manifolds its also currently a y plan system so I'll change it to an S plan other wise I'll get reverse circulation. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 17, 2017 22:35:50 GMT
Which one has the Safety clutch chaps?!👍 They all have a clutch mate, very good drills I've thrown all sorts at mine and it keeps coming for more. |
|
