Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2017 22:48:53 GMT
Hi Tom love your YouTube videos.how do you create a manifold with copper 22mm pipe with about four 8mm pipes soldered inside the 22mm. Please do a video on YouTube please found this on my flow and return central heating
|
|
|
|
Post by tomplum on Dec 9, 2017 22:54:15 GMT
ok sadek,, will do it,  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 10, 2017 15:23:14 GMT
I generally use the push fit manifolds for 10mm, here's one in place on a first fix job. Attachment Deleted |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 10, 2017 15:26:26 GMT
|
|
|
|
Post by tomplum on Dec 10, 2017 15:32:00 GMT
pushfit are by far much easier to use, but I don't think you can get 8mm in pushfit so you'll have to use a 8 x 10 reducer at a convenient point,
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 10, 2017 15:44:25 GMT
pushfit are by far much easier to use, but I don't think you can get 8mm in pushfit so you'll have to use a 8 x 10 reducer at a convenient point, I've never seen an 8mm push fit one either Tom. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 24, 2017 9:11:57 GMT
Thanks everyone your help is much appreciated
|
|
