|
|
Post by endfeed on Dec 12, 2017 19:11:04 GMT
Masonary core bit for 110 sockets is it 117mm or 127mm?  ?🤔 |
|
|
|
Post by tomplum on Dec 12, 2017 19:22:56 GMT
I've never been that accurate endfeed, I use a 150mm ( 6 inch) anything less than 140 is not big enough, oooh missus  |
|
|
|
Post by endfeed on Dec 12, 2017 20:20:56 GMT
Going to treat myself to the the core bit set at screewfix, 117mm is in the kit just wanted to make sure my socket would drop into wall,it's the erbauer set...
|
|
|
|
Post by battle1066 on Dec 12, 2017 20:26:03 GMT
What I've found Endfeed - 117 makes it tight for pointing in and usually looks odd compared to the pointing already there.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 12, 2017 20:37:17 GMT
Going to treat myself to the the core bit set at screewfix, 117mm is in the kit just wanted to make sure my socket would drop into wall,it's the erbauer set... That set is a good kit mate I've done shit loads with them before, as Tom said bigger the better and with the 117mm you'll have to chisel round the edge to get the socket in which I've done plenty of times when builders put the hole in, it's not too bad.  |
|
|
|
Post by endfeed on Dec 12, 2017 20:38:30 GMT
We share core bits at work all the sizes are worn off. The socket for bog waist drops in lovely,with a nice space for pointing up,it must be a 127mm💪cheers battle.
|
|
|
|
Post by endfeed on Dec 12, 2017 20:39:17 GMT
Going to treat myself to the the core bit set at screewfix, 117mm is in the kit just wanted to make sure my socket would drop into wall,it's the erbauer set... That set is a good kit mate I've done shit loads with them before, as Tom said bigger the better and with the 117mm you'll have to chisel round the edge to get the socket in which I've done plenty of times when builders put the hole in, it's not too bad. |
|
|
|
Post by rocketmanbkk on Dec 12, 2017 20:41:12 GMT
How much is that set EF?
I also need a good set.
|
|
|
|
Post by endfeed on Dec 12, 2017 20:42:05 GMT
It's a shame the kit don't come with 127mm instead of 117mm,👍
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 12, 2017 20:43:48 GMT
It's a shame the kit don't come with 127mm instead of 117mm,👍 You can either buy it as a single mate or buy a 5 core kit. |
|
|
|
Post by endfeed on Dec 12, 2017 20:44:47 GMT
How much is that set EF? I also need a good set. £72 mate,just got out spring screewfix catalog £58 missed out there😕 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 12, 2017 20:45:47 GMT
|
|
|
|
Post by endfeed on Dec 12, 2017 23:12:11 GMT
I've never been that accurate endfeed, I use a 150mm ( 6 inch) anything less than 140 is not big enough, oooh missus going to buy core bits separate 150mm 52mm 38mm😁cheers tom,think IV got the harbour in cheap set in shed, |
|
?🤔
