|
|
Post by rocketmanbkk on Jan 13, 2018 10:20:27 GMT
|
|
|
|
Post by endfeed on Jan 13, 2018 11:04:27 GMT
Nice flame coming out the Nossels😀... that's a right bargain you got there✌️
|
|
|
|
Post by tomplum on Jan 13, 2018 11:38:57 GMT
yep, the best on the market,and no mistake, but if you like a bargain the cheap chinese one that Dick linked here is good for the money too and handy as a fall back,  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 13, 2018 14:15:54 GMT
|
|
|
|
Post by dickpuller on Jan 13, 2018 15:51:43 GMT
Can you still loosen the grub screw & rotate the control valve 90degrees, to adjust with your thumb when in use? Or is that not the same torch?
By the way, if you’re short of a few bob after Xmas: the Chinese Gas Torch from Whanking Industries (Hong Kong) Ltd is quality!!
|
|
|
|
Post by battle1066 on Jan 13, 2018 16:27:18 GMT
Can you still loosen the grub screw & rotate the control valve 90degrees, to adjust with your thumb when in use? Or is that not the same torch? Tom, can you do a video on the above on what Dick is suggesting? |
|
|
|
Post by tomplum on Jan 13, 2018 17:32:17 GMT
I'll have a look at that battle, I've never done it myself, so I'll see if its possible and if it is, we'll take it in the studio foto
|
|
|
|
Post by tomplum on Jan 13, 2018 17:54:33 GMT
just had a quick shufftie in the shed, there is a grubscrew and the torch nozzle will pull out, but its not twistable because the little pipe going from the handset to the nossle is fixed, so it has no where to go, Dick must be talking about a differant model,  |
|
|
|
Post by battle1066 on Jan 13, 2018 18:32:42 GMT
just had a quick shufftie in the shed, there is a grubscrew and the torch nozzle will pull out, but its not twistable because the little pipe going from the handset to the nossle is fixed, so it has no where to go, Dick must be talking about a differant model,  Maybe Dick will educate us further as I was and still am puzzled.  For trying though Tom. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 13, 2018 19:48:42 GMT
|
|
|
|
Post by tomplum on Jan 13, 2018 19:56:36 GMT
oh reet, I see what you mean thanks for that PB, |
|
|
|
Post by battle1066 on Jan 13, 2018 20:41:48 GMT
You have a 2mm grub screw top and bottom of the control knob meaning you can twist it like this. Cheers for that PB - everyday is a school day here. |
|
|
|
Post by rocketmanbkk on Jan 13, 2018 21:20:06 GMT
Does it help? I’ll try tomorrow. Might help
|
|
|
|
Post by rocketmanbkk on Jan 13, 2018 21:25:13 GMT
Off the subject a bit but the monument one I thought was double threaded isn’t but it’s broken. You know the bottom bit that fits into the gas bottle before twisting, it snapped off. I pull the bit out of the bottle & the bit in the bottom of the torch twisted out. I’ve no idea what it’s called but I’ve looked online for a spare bit no luck. If I can get one then it’ll be a spare torch
Any ideas?
|
|
|
|
Post by rocketmanbkk on Jan 13, 2018 21:38:54 GMT
This could be it?  |
|
For trying though Tom.