|
|
Post by endfeed on Feb 27, 2018 17:32:49 GMT
Attachment Deletedit's arrived,nice & quick,no bloody washers with it smiley-face-shaking-fist
|
|
|
|
Post by dickpuller on Feb 27, 2018 20:57:28 GMT
it's arrived,nice & quick,no bloody washers with it  Normally a washer incorporating the mesh filter on the 3/4” nuts EF. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 27, 2018 20:59:00 GMT
It looks good value for money  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 27, 2018 21:01:00 GMT
it's arrived,nice & quick,no bloody washers with it Normally a washer incorporating the mesh filter on the 3/4” nuts EF. The little chinese fellow forgot to put them in.  |
|
|
|
Post by endfeed on Feb 27, 2018 21:23:14 GMT
it's arrived,nice & quick,no bloody washers with it Normally a washer incorporating the mesh filter on the 3/4” nuts EF. View Attachmentbugger all dick,I'll have a hunt around van see what ive got |
|
|
|
Post by endfeed on Feb 27, 2018 22:36:07 GMT
|
|
|
|
Post by dickpuller on Feb 28, 2018 12:12:00 GMT
these should do the trick  ... Or Washing Machine hose washers EF |
|
|
|
Post by endfeed on Mar 2, 2018 20:42:06 GMT
|
|
|
|
Post by endfeed on Mar 2, 2018 20:48:43 GMT
Attachment Deletedthe tails for new bath mixer would not drop into tap connector, different sizes,ended up having to use flexible connector s.and didn't come with washer to connect bath mixer, apart from that works really well...
|
|
|
|
Post by endfeed on Mar 2, 2018 20:50:49 GMT
|
|
|
|
Post by battle1066 on Mar 2, 2018 20:55:31 GMT
the tails for new bath mixer would not drop into tap connector, different sizes,ended up having to use flexible connector s.and didn't come with washer to connect bath mixer, apart from that works really well... So what size were the tap tails then Endfeed if they didn't fit the original fixings? |
|
|
|
Post by endfeed on Mar 2, 2018 21:01:12 GMT
The treads fitted fine,but the neck of the tap connector would not fit in hole tryed pushing it hard,no chance. Was going to file it,thought fook that! So I got two flexi. Would of dropped straight in otherwise smiley-face-shaking-fist
|
|
|
|
Post by battle1066 on Mar 2, 2018 21:05:56 GMT
The treads fitted fine,but the neck of the tap connector would not fit in hole tryed pushing it hard,no chance. Was going to file it,thought fook that! So I got two flexi. Would of dropped straight in otherwise Nice to know that Endfeed cause you can pre-pep a set of tails in advance.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 2, 2018 21:22:42 GMT
had to split some olives, awesome tool, top notch p.b Once you've had one there's no going back |
|
...
