|
|
Post by battle1066 on Mar 5, 2018 21:49:22 GMT
I think you mean a pressurised heating system battle not unvented. I've never seen fill method 3 battle - it seems to be gravity fed with a filling loop, all very odd. Yes pressurised heating with unvented cylinder Tappy. |
|
|
|
Post by crowsfoot on Mar 5, 2018 21:51:45 GMT
I'd say it's on the system boiler itself then battle.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 5, 2018 21:55:05 GMT
He says it's a Gledhill cylinder unvented. It's not a sealed heating system then ! The cylinder is unvented thought. |
|
|
|
Post by battle1066 on Mar 5, 2018 21:56:16 GMT
|
|
|
|
Post by battle1066 on Mar 5, 2018 21:57:25 GMT
He says it's a Gledhill cylinder unvented. It's not a sealed heating system then ! The cylinder is unvented thought. So F&E tank in the loft? |
|
|
|
Post by crowsfoot on Mar 5, 2018 21:58:40 GMT
Maybe fill method 3 is for an high rise block of flats where the mains water as to be ipumped to large water tanks located on the roof.
That's all I can think of at present.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 5, 2018 22:00:28 GMT
It's a vented heating system with a unvented cylinder.
|
|
|
|
Post by battle1066 on Mar 5, 2018 22:03:37 GMT
It's a vented heating system with a unvented cylinder. I've asked him what's in the loft plumbing wise and the reply "Toys and board games!" |
|
|
|
Post by crowsfoot on Mar 5, 2018 22:04:18 GMT
It's not a sealed heating system then ! The cylinder is unvented thought. So F&E tank in the loft? Yes, it seems to be an old gravity fed system with expansion tank in the loft (most likely). Could be in a cupboard though. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 5, 2018 22:08:25 GMT
That boiler can be installed vented or sealed so there's either a vessel and filling loop hiding somewhere or it does have an f&e tank supplying it.
|
|
|
|
Post by tomplum on Mar 5, 2018 22:08:38 GMT
its a funny set up, heath robinson comes to mind aided with our own bearwood as assistant in charge,  |
|
|
|
Post by battle1066 on Mar 5, 2018 22:08:40 GMT
Thank you for your replys chaps as always  |
|
|
|
Post by tomplum on Mar 5, 2018 22:12:41 GMT
we need some pics of the cylinder, that boiler is 80's/90's so it could be either vented or unvented,
|
|
|
|
Post by tomplum on Mar 5, 2018 22:14:30 GMT
interesting thread though,, |
|
|
|
Post by battle1066 on Mar 5, 2018 22:24:21 GMT
we need some pics of the cylinder, that boiler is 80's/90's so it could be either vented or unvented, He sent me these images so far but going to view on Wednesday, so I will take a few snaps myself. Attachment DeletedAttachment Deleted |
|
