|
Post by rocketmanbkk on Mar 12, 2016 9:45:30 GMT
Can you see what you think please?
Plumbed in a compact dishwasher yesterday. Turned main stopcock off & put pipe from sink cold etc. All ok no leaks.
Customer just phoned to say her elec shower has no water, she asked me to test it yesterday & it took about 20secs for water to come out.
The main stopcock was quite stiff but fully open.
I'll pop to have a look.
Any thoughts? Not sure how I'd fit a new stop cock as there's no play on pipes & it's tight.
Thx
Rct - worried
|
|
|
Post by tomplum on Mar 12, 2016 11:14:10 GMT
what pressure have you at the taps near the shower?? if they are working ok its very likley some mucks got in the shower, or it just might be the showers fucked and nothing to do with you doing the washer, this is a problem with our job, we very often get " it was ok till you fitted the other taps" , if the taps near the shower are slow too, it likely the stoptap is fucked inside and that means getting the water off from outside, that can be either dead easy or a nightmare, anyway rocket good luck mate let us know how you go,
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 12, 2016 11:29:48 GMT
No need to worry about it Rocky as Tom said comes with the job. Keep us updated.
|
|
|
Post by rocketmanbkk on Mar 12, 2016 11:49:22 GMT
I've fixed it!!
I turned the stopcock fully off & on again & it's ok
Maybe a bit of dirt in it?
Anyway, she's happy!!
Thx for your replies & help
Is the quiz on later??
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 12, 2016 11:55:17 GMT
Top job.
|
|
|
Post by tomplum on Mar 12, 2016 11:56:21 GMT
it sure is Rockett, 8.30pm, the question are here and WR, answers this week at WR its an away game, well done with the stop tap, just shows that going away from the job and having a think is a wise think to do, some would go to panick mode and start taking stuff apart, its called ' doing the headless chicken'
|
|