|
|
Post by dickpuller on Mar 21, 2018 20:34:30 GMT
|
|
|
|
Post by dickpuller on Mar 21, 2018 20:36:22 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 21, 2018 20:44:14 GMT
Most new builds now have TMV's under the bath. qwerty
|
|
|
|
Post by dickpuller on Mar 21, 2018 20:47:57 GMT
Yes PB it’s been a requirement here in Scotland for some time. As you can see in the photo it’s sited at the front of the bath, so a quick removal of the panel for an annual service.
I posted the photos up because I thought people would be interested.
|
|
|
|
Post by tomplum on Mar 21, 2018 20:48:48 GMT
plumbing of today, not a soldered joint in sight,,,  |
|
|
|
Post by dickpuller on Mar 21, 2018 20:50:15 GMT
plumbing of today, not a soldered joint in sight,,, Just below the boiler & all gas pipes. |
|
|
|
Post by tomplum on Mar 21, 2018 20:50:29 GMT
yes indeed Dick its interesting to me,  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 21, 2018 20:52:10 GMT
Yes PB it’s been a requirement here in Scotland for some time. As you can see in the photo it’s sited at the front of the bath, so a quick removal of the panel for an annual service. I posted the photos up because I thought people would be interested. Yes at least you can access it easy like that Dick I don't think it's a requirement down this way yet mate but it's becoming more and more common place. Nice work mate. |
|
|
|
Post by dickpuller on Mar 21, 2018 20:53:20 GMT
If anyone has any questions fire away.
|
|
|
|
Post by boilerdoktor on Mar 21, 2018 20:54:11 GMT
Is the flow of dhw restricted ? Went to one recently and the complaint was it took an age to run the bath....was about 5 lpm
is there a minimum ?
|
|
|
|
Post by dickpuller on Mar 21, 2018 20:56:07 GMT
Yes PB it’s been a requirement here in Scotland for some time. As you can see in the photo it’s sited at the front of the bath, so a quick removal of the panel for an annual service. I posted the photos up because I thought people would be interested. Yes at least you can access it easy like that Dick  I don't think it's a requirement down this way yet mate but it's becoming more and more common place. Nice work mate. Standard Spec for a well known national builder. Timber frame 3 Bedroom houses with a combi, bathroom, kitchen sink & cloakroom. |
|
|
|
Post by dickpuller on Mar 21, 2018 20:58:44 GMT
Is the flow of dhw restricted ? Went to one recently and the complaint was it took an age to run the bath....was about 5 lpm is there a minimum ? 3 Bar PRV on the incoming mains cold water. 35KW Ideal Logic Combi 14Ltr/Min. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 21, 2018 21:01:16 GMT
What size main do they bring in Dick 25mm ? Round here it's 25mm for that size house.
|
|
|
|
Post by dickpuller on Mar 21, 2018 21:04:33 GMT
What size main do they bring in Dick 25mm ? Round here it's 25mm for that size house. 25mm MDPE, but if it’s more than 25M from the Street Main it’s 32mm. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 21, 2018 21:11:40 GMT
I was in a big house the other day and the basement had 4 unvented cylinders in series and 50mm incoming with accumulators, I much prefer the simple systems as you walk into these places and it takes a while to break the system down ( no fun) |
|
I don't think it's a requirement down this way yet mate but it's becoming more and more common place.