|
Post by rocketmanbkk on Apr 15, 2018 15:06:52 GMT
I’ve replaced one part but it drips, never while I’m there, it must be a build up of a drip overnight
I’ve tightened it a bit & a bit more
Very frustrating
Any thoughts? A wrap of order? Lsx?
Very annoying
Cheers all
|
|
|
Post by tomplum on Apr 15, 2018 15:21:52 GMT
when ever this happens to me i test the overflow, thats often the culprit, when you've gone the woman washes up the overflow gets wet and the drip appears,
|
|
|
Post by rocketmanbkk on Apr 15, 2018 16:53:18 GMT
It’s not the overflow Tom
I can see it when it appears after hours!
It must be so slow that it builds then a drip
Winding me up
|
|
|
Post by endfeed on Apr 15, 2018 17:06:57 GMT
Number of plumbers went to this type of job at my place,the Tennant gave me loads of shit even before I walked through the door!cu#t! It appeared to be leaking from trap but on closer inspection the slotted waste had corroded and had little pin holes in it! If it's not that I put PTFE around the plastic part of trap and tighten to slotted waste threads!never lets me down!👍🏼
|
|
|
Post by rocketmanbkk on Apr 15, 2018 19:19:14 GMT
Cheers all
The first leak was at the bottom of p trap
Now I think there’s one further up
|
|
|
Post by rocketmanbkk on Apr 15, 2018 19:22:13 GMT
First leak bottom nut Now I think it’s the higher one after lower one fixed A real pain
|
|
|
Post by rocketmanbkk on Apr 15, 2018 19:25:42 GMT
Sorry about the writing being like a kid. It’s not easy on a phone
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 15, 2018 19:33:10 GMT
I'd use a smear of tru blue rocky mate, seals everything mate.
|
|
|
Post by rocketmanbkk on Apr 15, 2018 19:38:24 GMT
I'd use a smear of tru blue rocky mate, seals everything mate. True blue? Ok. I have some. Just around the water thin plastic washer or threads as well? I was going to ptfe over washer same as I would an olive if I needed too 😙
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 15, 2018 19:40:58 GMT
Just round the washers mate.
|
|
|
Post by rocketmanbkk on Apr 15, 2018 19:44:53 GMT
Just round the washers mate. I’ll do that pb. Itoisees me off. Dry as a nuns chuff when I’m there, was there today for 4 hrs, not a drip, then ... yep, you’ve guessed it. Annoying
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 15, 2018 19:49:26 GMT
Just round the washers mate. I’ll do that pb. Itoisees me off. Dry as a nuns chuff when I’m there, was there today for 4 hrs, not a drip, then ... yep, you’ve guessed it. Annoying You always find they do it more when there is a long run of hot water through the trap where expansion takes place, tru blue will do the trick.
|
|
|
Post by battle1066 on Apr 15, 2018 19:51:39 GMT
Just round the washers mate. I’ll do that pb. Itoisees me off. Dry as a nuns chuff when I’m there, was there today for 4 hrs, not a drip, then ... yep, you’ve guessed it. Annoying It might pay you to watch what she's washing and how, in case it's stressing the plumbing somehow like fill the sink with tatties.
|
|