aj
head of marketing and bargains 
Posts: 541 
|
Post by aj on Apr 30, 2018 11:24:05 GMT
Can you file a standard solder ring coupler to turn it into a slip coupler?
|
|
|
|
Post by tomplum on Apr 30, 2018 13:39:27 GMT
I've never tryed it with a solder ring because they are hard to slide because of the solder rings, Yon can use an ordinary endfeed coupling, you can twat it past the stop then knock it back using the guide from your bender, I thought I done a video on this but can't find it, I'll make a new video, call back later
bMaM72ureaAMEVc6b1_1 camera
|
|
|
|
Post by tomplum on Apr 30, 2018 14:52:22 GMT
|
|
aj
head of marketing and bargains
Posts: 541
|
Post by aj on Apr 30, 2018 15:38:25 GMT
thank you tom
|
|
|
|
Post by dickpuller on Apr 30, 2018 17:15:17 GMT
Just use your Chinky Expanders to make a slip coupling👍
|
|
|
|
Post by battle1066 on Apr 30, 2018 17:23:22 GMT
Just use your Chinky Expanders to make a slip coupling👍 That would make a good video Tom, as twelve 15mm couplers and the Tools paid for! |
|
|
|
Post by endfeed on Apr 30, 2018 17:38:04 GMT
Moving the coupler with bending guide!a tip within a tip!!!!like it👍👍👍👍
|
|
|
|
Post by tomplum on Apr 30, 2018 17:44:30 GMT
Moving the coupler with bending guide!a tip within a tip!!!!like it👍👍👍👍 yea endfeed, its a sogof top tip,( show one,get one free ),,,,,, hush |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 30, 2018 18:17:43 GMT
Moving the coupler with bending guide!a tip within a tip!!!!like it👍👍👍👍 Tom's a fountain of information and tips.  |
|
|
|
Post by glowbug on Apr 30, 2018 19:47:23 GMT
Great tip by Tom, I used to file the inside out, but if I need a slip coupler in future ,will use the”wigan elbow” technique💪HAVE IT!!
Ps Tom thanks for the tip I read ages ago ,on your forum ,about removing siliconed close coupled, wood saw down the back worked a treat👍Today when I came across one, I think it was your tip anyway , cant remember exactly
|
|
|
|
Post by tomplum on Apr 30, 2018 20:07:03 GMT
another method for the sillycunted cistern is a old guitar string, I might do a video about that if i remember to, |
|
|
|
Post by woodbine66 on May 2, 2018 18:48:33 GMT
Great tip by Tom, I used to file the inside out, but if I need a slip coupler in future ,will use the”wigan elbow” technique💪HAVE IT!! Ps Tom thanks for the tip I read ages ago ,on your forum ,about removing siliconed close coupled, wood saw down the back worked a treat👍Today when I came across one, I think it was your tip anyway , cant remember exactly
I had one where someone must have used a whole tube of sillycoon sealant to stick a c/c toilet cistern to the wall. Couldn't get a saw down, so used a cheese wire. Similar to Tom's guitar string, but I ain't musical unfortunately.
|
|
|
|
Post by arfur chrysaik on May 2, 2018 22:23:10 GMT
another method for the sillycunted cistern is a old guitar string, I might do a video about that if i remember to,  an old guitar string will also cut through plastic pipe in a tight corner too, so will an old bike gear/ brake cable . |
|
