|
|
Post by dickpuller on Jan 7, 2019 17:49:20 GMT
This daft cunt is promoting DaftyDIY Unvented cylinder installations, some of the questions & proposed installation methods are very dangerous. The moron doesn’t know what he’s doing:
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 7, 2019 21:55:34 GMT
The blokes a twat ! He has got a face you want to slap and he can't solder for shit.  |
|
|
|
Post by crowsfoot on Jan 8, 2019 7:06:07 GMT
He could do with that temperature release valve shoving up his arse then discharging! I'd laugh at the steam coming out of his ears  !!! Sorry "Rodge the Dodge", he's really a good bloke at heart! |
|
|
|
Post by DIYDafty on Jan 8, 2019 18:54:35 GMT
Well us Dafty's are allowed to, for example, change a socket in most rooms. If it wasn't protected by an rcd in the cu as many are not and I was to touch it while live that could kill me very quickly. Unfortunately, people get electrocuted for all kinds of reasons all the time. I don't know how many exploding uv cylinders there have been?
Hiding information is just making Dafty installations less safe than they would be anyway and I think the real reason is to provide those in the trade with respect (even though most but not all deserve that) as engineers and keep prices high.
Soon you'll need to take a health and safety course for crossing the road.
|
|
|
|
Post by crowsfoot on Jan 8, 2019 20:56:44 GMT
Excuse me sir are you a RRC? "You can't cross the road then unless you find someone who is" "after all you might get run over and you've got to be safe haven't you"  |
|
|
|
Post by DIYDafty on Jan 8, 2019 22:24:54 GMT
Excuse me sir are you a RRC? "You can't cross the road then unless you find someone who is" "after all you might get run over and you've got to be safe haven't you" RRC = Registered Road Crosser ? |
|
|
|
Post by dickpuller on Jan 9, 2019 7:23:35 GMT
Well us Dafty's are allowed to, for example, change a socket in most rooms. If it wasn't protected by an rcd in the cu as many are not and I was to touch it while live that could kill me very quickly. Unfortunately, people get electrocuted for all kinds of reasons all the time. I don't know how many exploding uv cylinders there have been? Hiding information is just making Dafty installations less safe than they would be anyway and I think the real reason is to provide those in the trade with respect (even though most but not all deserve that) as engineers and keep prices high. Soon you'll need to take a health and safety course for crossing the road. Oh I hear what you’re saying Dafty, but hey you can just ignore the rules matey, your choice. As for H&S, well lots is just common sense. Historically, unvented cylinders were introduced into the UK fairly recently, under a cloud of Rules & Regulations. Like Gas work, you need the qualifications to be competent. |
|
|
|
Post by Jimmy Silverline on Jan 9, 2019 9:30:42 GMT
Walter used to work in the R&D Dept of Silverline, He was a much respected senior engineer and predicted that a disaster will happen one day, To be safe and make sure you live happily ever after, fit a heat bank cylinder, they are much much safe and do not need any qualification to install
|
|
|
|
Post by woodbine66 on Jan 9, 2019 18:18:34 GMT
Hope the rag heads don't find out about this. Why go to the bother of trying to source Semtex or TNT. Just take a small UVC onto the underground with you.
 |
|
|
|
Post by crowsfoot on Jan 9, 2019 19:11:24 GMT
This daft cunt is promoting DaftyDIY Unvented cylinder installations, some of the questions & proposed installation methods are very dangerous. The moron doesn’t know what he’s doing: Interestingly enough today I was fitting a replacement UV cylinder and among the usual bag of tricks (expansion vessel, pressure reducing valve etc) was a MV and a new dual thermostat (both new items) included in the normal package that we get from kingspan with these UVs. The apprentice said to me why the fuck have they included these? Well, thanks to Dicks posting of "Rodge the Dodge" fitting the unvented cylinder I knew the answer (at 16:12). No doubt it will be in the syllabus for next unvented course that I undertake! Just goes to show how we all learn new things in the brew cabin. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 9, 2019 19:26:46 GMT
Hope the rag heads don't find out about this. Why go to the bother of trying to source Semtex or TNT. Just take a small UVC onto the underground with you.
You can't call them rag heads woody, it's not "politically correct"  CUNTS !!! Is fine though  |
|
|
|
Post by tomplum on Jan 9, 2019 21:02:04 GMT
cunt is fine because it stands for curtain,unwrapped n' tied on my head, there's nothing offence in that, |
|
|
|
Post by Roger Bisby on Jan 10, 2019 17:07:31 GMT
|
|
|
|
Post by woodbine66 on Jan 10, 2019 21:25:39 GMT
Hope the rag heads don't find out about this. Why go to the bother of trying to source Semtex or TNT. Just take a small UVC onto the underground with you.
You can't call them rag heads woody, it's not "politically correct"  CUNTS !!! Is fine though 
Sorry if I offended you, PB. It's the in thing these days for everyone to compete to see who can be the most offended.
I really meant to call them stone age, carpet-kissing camel worriers.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 10, 2019 21:37:25 GMT
Listen up, and listen up good, fuck the PC jerk offs, say whats on your mind, Now I'm looking into this flying hot water geezer thing, Bearswood Brown did a job in that house a while back. anyone know where he is ??
|
|
!!!
CUNTS !!! Is fine though 
CUNTS !!! Is fine though 