Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 26, 2019 15:47:54 GMT
Been out to a leak this morning - should of been a quick call but the guy didn't stop talking  first call tomorrow is an immersion element change, could to interesting  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 27, 2019 15:51:30 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 27, 2019 15:54:27 GMT
|
|
|
|
Post by endfeed on Aug 27, 2019 18:30:11 GMT
Any lump hammer needed? Any Heat?
|
|
|
|
Post by endfeed on Aug 27, 2019 18:33:43 GMT
Attachment Deleteddo you like my bank holiday job, had to fit 2 isolation valves and 2 flexis ! To a basin  
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 27, 2019 18:41:20 GMT
Any lump hammer needed? Any Heat? Hammer but no heat  |
|
|
|
Post by boilerdoktor on Aug 27, 2019 18:41:32 GMT
I’ve changed two immersions on an unvented in the last few months. I’m going back with a titanium one. Problem is it’s on a bore hole, the chlorine is attacking it
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 27, 2019 18:42:29 GMT
do you like my bank holiday job, had to fit 2 isolation valves and 2 flexis ! To a basin Shocking !!!!  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 27, 2019 18:47:09 GMT
I’ve changed two immersions on an unvented in the last few months. I’m going back with a titanium one. Problem is it’s on a bore hole, the chlorine is attacking it I find the unvented you can give the old immersion more violence as the copper cylinder you have to tickle them out The last unvented immersion I changed was a mega flow Doc and the cost of the immersion was ridiculous  |
|
|
|
Post by battle1066 on Aug 27, 2019 20:13:44 GMT
Mind that element looks really rough what type of water you dealing with down there PB? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 27, 2019 20:16:16 GMT
Mind that element looks really rough what type of water you dealing with down there PB? Hard water battle, this element is apparently 3yrs old but I'd imagine it's for soft water area only. |
|
|
|
Post by battle1066 on Aug 27, 2019 20:25:52 GMT
Mind that element looks really rough what type of water you dealing with down there PB? Hard water battle, this element is apparently 3yrs old but I'd imagine it's for soft water area only. I've never changed any up here what look as rough on removal as that and the colours are super vivid on yours, up here it's just a light brown its must be the ostrogen they leave in it in Kent. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 27, 2019 20:40:56 GMT
Completely destroyed. When I tested it on my first visit it gave me a perfect reading on resistance and then I tested continuity between live and earth and she buzzed  |
|
|
|
Post by crowsfoot on Aug 28, 2019 6:25:32 GMT
I’ve changed two immersions on an unvented in the last few months. I’m going back with a titanium one. Problem is it’s on a bore hole, the chlorine is attacking it You've got my attention here Doc. I'm guessing that the (too much) chlorine is being added because the bore hole supply is contaminated? |
|
|
|
Post by crowsfoot on Aug 28, 2019 6:27:26 GMT
Just enough room the PB to get the IH out from below that H/W/D pipe above!
|
|
first call tomorrow is an immersion element change, could to interesting 
