|
|
Post by boilerdoktor on Sept 12, 2019 20:36:00 GMT
Thanks pb...will that take the olive from under a nut like on a rad if you know what I mean. When there’s not a lot of room ? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 12, 2019 20:50:23 GMT
|
|
|
|
Post by cylinderfella on Sept 12, 2019 20:52:13 GMT
Here's one in action if a bit long winded.........
Skip to 2 mins before you fall asleep
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 12, 2019 21:02:20 GMT
The only disadvantage I've found with this splitter is on old 1/2" copper pipe that has a thicker wall, you can't always get the bit that goes in the pipe to go in.
Apart from that it's the dogs danglers
|
|
|
|
Post by DIYDafty on Sept 12, 2019 21:09:13 GMT
Here's one in action if a bit long winded.........Skip to 2 mins before you fall asleep You call most of them right cylinderfella but this one you got wrong. The guy is pulling more than olives with this. Look how he's got interest from the likes of Ms Flores in the comments section - she obviously loves it ! |
|
|
|
Post by cylinderfella on Sept 12, 2019 22:05:15 GMT
 Wow! I think I'll make a dull video for her about bending!!
|
|
|
|
Post by dickpuller on Sept 13, 2019 5:41:08 GMT
I’ll make a video of Olive pulling herself off, that’ll get a few comments!!!😟😟😟
|
|
|
|
Post by rocketmanbkk on Sept 13, 2019 6:37:25 GMT
 f.f.s plumber boy I bought the olive splitter tool on your advice, it's silver line shite!!  . I bet it hasn't let you down though ?  Jayzuss, that’s unlucky |
|
|
|
Post by rocketmanbkk on Sept 13, 2019 6:38:57 GMT
Dickie work wear is good. I’ve got 2 pairs of trousers, very thick so good in winter. Sweat your nads of in summer.
Got the DD drain down hose too
It’s good gear
|
|
|
|
Post by dickpuller on Sept 13, 2019 9:14:14 GMT
|
|
|
|
Post by jcplumb on Sept 13, 2019 13:01:34 GMT
|
|
|
|
Post by woodbine66 on Sept 15, 2019 16:22:06 GMT
AJ, the brand now appears irrelevant, regardless of the name stamped on it or who’s selling it, if it’s good quality & value, the why worry👍
Exactly. Another example is Hilmor benders. Until several years ago, they were quality kit, made for Hilmor by a company called Bend It Now. Then Hilmor decided to outsource manufacture to the Chinkys. So if you buy a Hilmor bender now, it may look the same, but the quality is shite.
Luckily, Bend It Now kept making the same quality benders that they used to supply to Hilmor. Little bit more expensive, but worth it for every day/pro use.
www.benditnow.co.uk/?gclid=EAIaIQobChMIkNrtq53T5AIVxrHtCh1XKgTREAAYASAAEgIYSfD_BwE
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 15, 2019 16:27:02 GMT
Have you ever noticed the yanks never bend pipes or hardly ever  |
|
|
|
Post by dickpuller on Sept 16, 2019 5:26:05 GMT
Have you ever noticed the yanks never bend pipes or hardly ever They generally use a thin wall copper pipe PB. Though thicker wall is available. Type L & M I think? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 16, 2019 13:35:38 GMT
Have you ever noticed the yanks never bend pipes or hardly ever  They generally use a thin wall copper pipe PB. Though thicker wall is available. Type L & M I think? I think you're right Dick. They use one type on mains water and another on heating  |
|
but this type may suit you better in tight spots
Wow! I think I'll make a dull video for her about bending!!
f.f.s plumber boy I bought the olive splitter tool on your advice, it's silver line shite!! 
.
