|
|
Post by DIYDafty on Oct 27, 2019 21:17:21 GMT
|
|
|
|
Post by battle1066 on Oct 27, 2019 21:27:40 GMT
A while ago both Tom and PB done videos on two different pumps they bought to boost the water pressure on different jobs at around £40. Now for me that allows at better solution and a tap of your choice for very little work if you've got the space for the pump. |
|
|
|
Post by arfur chrysaik on Oct 27, 2019 21:34:08 GMT
You want a tap or better still 2 seperate screw down taps with the inners washers instead of quarter turn ceramic discs and hard piped with copper instead of flexis for a better flow rate when there's not a lot of head.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 27, 2019 22:03:04 GMT
|
|
|
|
Post by endfeed on Oct 27, 2019 22:18:37 GMT
would these boosters work with a fortic? Always get moaning twata with fortics🥴🥴🥴 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 27, 2019 22:32:05 GMT
Yes they will work fine endfeed  |
|
|
|
Post by cylinderfella on Oct 27, 2019 22:49:09 GMT
|
|
|
|
Post by DIYDafty on Oct 27, 2019 22:52:49 GMT
Firstly, thanks a lot all for ideas. Pump look interesting. Are they normally fitted close to the tap? Do they make a lot of noise?
I definitely couldn't fit it close to the cylinder because this sink would be being used by a lodger but if no issue next to sink it seems like it could be a solution.
Good point about not using flexis. I'll do that for sure.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 27, 2019 23:00:18 GMT
They go under the kitchen sink or near by and they are very quiet indeed 👍
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 27, 2019 23:01:22 GMT
That is them Cinder's mate 👍 |
|
|
|
Post by DIYDafty on Oct 27, 2019 23:22:23 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 27, 2019 23:31:08 GMT
I have fitted different ones Dafty and had no problems mate 👍 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 27, 2019 23:37:19 GMT
When you get them let me know and I'll tell you the best way on installation.
|
|
|
|
Post by DIYDafty on Oct 28, 2019 0:00:43 GMT
When you get them let me know and I'll tell you the best way on installation. Thanks again. Should be arriving Tuesday but will be some weeks before installation - kitchen cupboards just about to be ordered etc. Getting everything early, since it helps planning - might need yet another DP switch etc... |
|
