Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 20, 2019 19:37:32 GMT
If you cut your pipe little shy of the stopper inside the compression fitting, would you risk it? I did the other day🤫🤫🤫 Fucking cowboy  |
|
|
|
Post by endfeed on Nov 20, 2019 19:46:22 GMT
If you cut your pipe little shy of the stopper inside the compression fitting, would you risk it? I did the other day🤫🤫🤫 Fucking cowboy  this town ain't big enough for the both of us 😂 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 20, 2019 19:59:00 GMT
Fucking cowboy this town ain't big enough for the both of us 😂 You talking to the mirror again  |
|
|
|
Post by endfeed on Nov 20, 2019 20:08:41 GMT
this town ain't big enough for the both of us 😂 You talking to the mirror again  yes mate  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 20, 2019 20:12:45 GMT
You talking to the mirror again yes mate  You're to honest endfeed.  |
|
|
|
Post by endfeed on Nov 20, 2019 20:16:29 GMT
I do a good dirty Harry too😂😂😂
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 20, 2019 20:23:19 GMT
I do a good dirty Harry too😂😂😂 Go ahead ! Make my day ! Punk !!!! |
|
|
|
Post by cylinderfella on Nov 20, 2019 20:33:03 GMT
Bit of a leak going on in this clip!!
|
|
|
|
Post by cylinderfella on Nov 20, 2019 20:41:22 GMT
If you cut your pipe little shy of the stopper inside the compression fitting, would you risk it? I did the other day🤫🤫🤫 I did........in my own place though. Fitting was a bit green a few months later............  Hope you don't get the  |
|
|
|
Post by endfeed on Nov 20, 2019 20:53:30 GMT
it wasn't me sir! It was a chap called p.b, here is his number sir.... See ya 
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 20, 2019 20:57:14 GMT
 it wasn't me sir! It was a chap called p.b, here is his number sir.... See ya   |
|
|
|
Post by DIYDafty on Nov 20, 2019 21:03:39 GMT
I've gotta ask this.
I've never fitted a HW cylinder but think the connectors are compression? If so, why are they any different from any other compression? Tom says in his video you can try to nip them up (NOT the HW cylinders though). What is special about them?
|
|
|
|
Post by endfeed on Nov 20, 2019 21:06:37 GMT
You get tapered fittings sometimes 👍
|
|
|
|
Post by tomplum on Nov 20, 2019 21:47:13 GMT
they are a double whammy, they connect the pipework to the flow and return and, are also a seperator of the 2 differant waters, the domestic hot water in the cylinder and the central heating water coming from the boiler, so it things go 'tits up' like they do in plumbing, the full cylinder can empty into your house, and even the most experienced plumber, cannot stop it once its gushing, |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 20, 2019 21:52:12 GMT
they are a double whammy, they connect the pipework to the flow and return and, are also a seperator of the 2 differant waters, the domestic hot water in the cylinder and the central heating water coming from the boiler, so it things go 'tits up' like they do in plumbing, the full cylinder can empty into your house, and even the most experienced plumber, cannot stop it once its gushing, It bit like when diyers turn the water off feeding the cylinder and then cut the pipe down by the cylinder |
|
this town ain't big enough for the both of us 😂
it wasn't me sir! It was a chap called p.b, here is his number sir.... See ya 
