|
|
Post by rocketmanbkk on Mar 20, 2020 15:22:07 GMT
This is a Vado shower The handle is loose. The grub screw comes out & the handle pulls off then out back on & it’s loose. The actual shower valve is ok, the spindle isn’t loose.  |
|
|
|
Post by battle1066 on Mar 20, 2020 17:48:54 GMT
Look to see if grub screw is biting on the correct place on the shaft spindle.
|
|
|
|
Post by endfeed on Mar 20, 2020 20:23:39 GMT
Are the splines worn down inside head? If it has splines that is....
|
|
|
|
Post by crowsfoot on Mar 20, 2020 20:32:01 GMT
Have a look through your scrap bag rocky you might get a decent grub screw off an old mixer tap spout or a pressure release valve (they look a similar size to me).
Last chance saloon for it would be to try a blob of solder down the hex?
|
|
|
|
Post by rocketmanbkk on Mar 21, 2020 5:57:53 GMT
Cheers
I tried the grub screw but it still didn’t work
I’ve emailed Vado with a photo to see what they say. It’s well out of warrantee.
|
|
|
|
Post by endfeed on Mar 21, 2020 8:36:09 GMT
Tell um it's fuckrd,stick it in your scrap bag, and bang a shiny new,new on. You could fix that then next week it goes fault again and they won't hesitate to call you back!👍👍👍👍
|
|
|
|
Post by rocketmanbkk on Mar 21, 2020 13:29:23 GMT
I’ve told the landlord it might not fix.
The toilet flush is faulty too, it’s a torbeck opella drop valve, when you push the flush button the middle part rises to flush the water but it doesn’t go back down so water continues to flow, if you touch it gently it goes down. I’ll replace it.
|
|
