|
|
Post by cylinderfella on Apr 30, 2020 21:46:54 GMT
Anyone got any tips for doing a slight bend in a waste pipe with the torch? Not a 90, just a slight slope to fall over a joist. Don't really like notching joists!! Thanks in advance.
|
|
|
|
Post by dickpuller on May 1, 2020 6:00:44 GMT
Anyone got any tips for doing a slight bend in a waste pipe with the torch? Not a 90, just a slight slope to fall over a joist. Don't really like notching joists!! Thanks in advance. If it’s just a slight kick, then a hot air gun is best, Heat & rotate over an area of about 300mm. You’ll know when it’s ready to bend, it’ll feel soft. Fairly simple really👍👍 |
|
|
|
Post by crowsfoot on May 1, 2020 6:10:22 GMT
By chance I made a video of the art of putting a kick in a waste pipe a couple of years ago (it's probably a toms tip as well) I'll re-post it any way. A pictures worth a 1000 words (as they say)  |
|
|
|
Post by tomplum on May 1, 2020 7:58:32 GMT
nice one tappy, the nice cheap blowtorch as well,  |
|
|
|
Post by cylinderfella on May 1, 2020 8:19:45 GMT
That's brilliant. Thanks guys 👍👍
|
|
|
|
Post by rocketmanbkk on May 1, 2020 16:31:11 GMT
Nice one Tappy
|
|
