|
|
Post by wingnut on Nov 8, 2020 14:32:19 GMT
Gents So the better half has decided she wants a pop up bath waste something like this victoriaplum.com/product/mode-spencer-gold-pop-up-bath-wasteNow my question is My overflow hole in the bath is 45mm, would the above fit ok, I don’t want to shell out before I know if possible As always many thanks for the advice |
|
|
|
Post by rocketmanbkk on Nov 8, 2020 15:18:23 GMT
If steer clear of Victoria plumb
I don’t know anyone with a good word to say about them, plumbers I mean not DiYers
|
|
|
|
Post by wingnut on Nov 8, 2020 15:28:43 GMT
If steer clear of Victoria plumb I don’t know anyone with a good word to say about them, plumbers I mean not DiYers No worries, tbh I just used that website for the link I wouldn’t buy from there |
|
|
|
Post by dickpuller on Nov 8, 2020 15:59:54 GMT
|
|
|
|
Post by wingnut on Nov 8, 2020 16:40:11 GMT
Thank you for the link How’s does the overflow part attach? |
|
|
|
Post by battle1066 on Nov 8, 2020 17:16:58 GMT
The image in the link shows push fit at the top (overflow point) and screw thread to the waste point.
|
|
|
|
Post by wingnut on Nov 8, 2020 17:21:55 GMT
The image in the link shows push fit at the top (overflow point) and screw thread to the waste point. Thank you, now to find one in gold |
|
|
|
Post by battle1066 on Nov 8, 2020 20:27:46 GMT
|
|
|
|
Post by wingnut on Nov 8, 2020 20:29:55 GMT
That looks just the ticket thank you |
|
|
|
Post by rocketmanbkk on Nov 8, 2020 20:51:15 GMT
I’ve got roper rodes taps at my gaff. Expensive but excellent quality. |
|
|
|
Post by cylinderfella on Nov 8, 2020 21:54:57 GMT
As Dick says go with a clacker, the other type is annoying, never seems to push down enough or pop up enough, has an annoying adjustable screw which can end up down the waste hole. I have this annoying type. If I had my way I'd replace it with 1970s rubber plug and chain !! But it's never our decision gents is it?  |
|
|
|
Post by dickpuller on Nov 9, 2020 6:23:24 GMT
|
|
|
|
Post by wingnut on Nov 9, 2020 11:06:46 GMT
|
|
|
|
Post by woodbine66 on Nov 9, 2020 11:17:00 GMT
If I had my way I'd replace it with 1970s rubber plug and chain !! But it's never our decision gents is it?
That's the problem. Other half always wants something better whereas we'd be happy with tried and tested plug. We have to pay for the new waste, we have to fit it, we have to sort it when the over complicated piece of shite goes wrong - and we get the grief because it regularly goes wrong.
|
|
|
|
Post by woodbine66 on Nov 9, 2020 11:22:53 GMT
Bit more expensive but great quality.
And made in Jockland. 
|
|
