|
|
Post by rocketmanbkk on Jan 14, 2021 15:50:49 GMT
What’s the smallest offset you’ve pulled on 15mm?
I did one today that was so slight I didn’t think it would work.
Did a favour for a friend who couldn’t line two pipes up.
Cheers all
|
|
|
|
Post by endfeed on Jan 14, 2021 19:52:47 GMT
I'd say about 30mm,for me👍
|
|
|
|
Post by cylinderfella on Jan 15, 2021 0:11:06 GMT
Sometimes you wouldn't know the measurements, just going with your eye, slight kinks, anything to line it up.
|
|
|
|
Post by endfeed on Jan 15, 2021 18:01:08 GMT
Attachment Deleted..had to pull a tight un today, this was the smallest I could do in the benders as I was forced out of the clip 
|
|
|
|
Post by tomplum on Jan 15, 2021 20:17:06 GMT
for a really really tight bend, you can't beat the old spring but, you have to anneal the copper on 22mm or it will hurt your knees, |
|
|
|
Post by endfeed on Jan 15, 2021 21:10:27 GMT
Attachment Deleted..I had the old spring out today,tom. Had to loop back on pipework under a basin behind a ped. Can do a full circle with this Tectight pipe👍
|
|
|
|
Post by tomplum on Jan 15, 2021 22:05:28 GMT
fair play endfeed, plumbers always find a way round a problem, using new materials and technology is what a good plumber will do. living, learning and passing it on,  |
|
|
|
Post by cylinderfella on Jan 15, 2021 23:43:20 GMT
View Attachment..I had the old spring out today,tom. Had to loop back on pipework under a basin behind a ped. Can do a full circle with this Tectight pipe👍 Sometimes you just feel like smashing those pedestals💪💪 |
|
|
|
Post by endfeed on Jan 16, 2021 10:22:38 GMT
View Attachment..I had the old spring out today,tom. Had to loop back on pipework under a basin behind a ped. Can do a full circle with this Tectight pipe👍 Sometimes you just feel like smashing those pedestals💪💪 that brought back a memory for me, an apprentice electrician droped a lump hammer in a basin I was working on,from height 😂😂😂😂😂 |
|
