|
|
Post by rocketmanbkk on May 13, 2016 16:32:06 GMT
Went back to the urinal job Took ceiling panels down, 2 leaks from compression fittings, tightened & all ok, no leaks. But, the ISO on the pipe to the pet lock is letting by, turned water off & replaced with decent wras one Dropped. Tried, tightening, loctite, lsx, ptfe around olive, still leaked!! I never had any pipe on me as I think it's the pipe, I'm going to redo the 10" after the ISO as that's where it's letting by. Couple of bends so good experience Customer very nice. It's a shipping company near Heathrow. Will go Monday afternoon  |
|
|
|
Post by jcplumb on May 13, 2016 16:41:43 GMT
Well that's a lesson learned mate, always have some pipe with you  Even for service jobs I make sure to have some offcuts and a few lengths, been caught out like you a couple of times. |
|
|
|
Post by rocketmanbkk on May 13, 2016 16:48:17 GMT
I had a piece but not long enough to bend  ? |
|
|
|
Post by jcplumb on May 13, 2016 16:55:02 GMT
Bummer, bet that was a smidge annoying  Bit like Tom with his flexi recently, I do that all the time... |
|
|
|
Post by rocketmanbkk on May 13, 2016 17:25:13 GMT
I need to buy a van pipe carrier really.
I'll sort it Monday.
Cheers
|
|
|
|
Post by tomplum on May 13, 2016 17:35:08 GMT
I need to buy a van pipe carrier really. I'll sort it Monday. Cheers I had a tip about pipe carries but i think it vanished, I'll have a look for it and if i can't find it, I'll look in the archives, smiley-sad056 nay |
|
|
|
Post by rocketmanbkk on May 13, 2016 18:00:08 GMT
Thx Tom
|
|
|
|
Post by tomplum on May 13, 2016 18:26:06 GMT
here it is, i found it, i use a soil pipe and fix that to the roof rack,
|
|
|
|
Post by battle1066 on May 13, 2016 19:13:04 GMT
here it is, i found it, i use a soil pipe and fix that to the roof rack, Tom I couldn't get that video to play from you embedded link your get an error as per the image attached. Attachment Deleted |
|
|
|
Post by battle1066 on May 13, 2016 19:24:58 GMT
That's fixed it now Tom  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 13, 2016 19:43:41 GMT
I always try and make sure i put some good size offcuts in the van if im doing any sort of plumbing as you can never tell whats gonna happen
|
|
|
|
Post by rocketmanbkk on May 13, 2016 19:57:48 GMT
Cheers Tom
|
|
|
|
Post by pipeslice on May 14, 2016 10:20:07 GMT
I need to buy a van pipe carrier really. I'll sort it Monday. Cheers I wouldnt bother with one of those rocket , some twat will break it open and nick the copper , your better off cutting the lengths in half and putting in the van and when ever you need full lengths just stick them on the roof rack and take them straight on to the job.......... |
|
?
